Retrieve Fe1 Frs Card Status - ADC Release 3.1 User Manual

Summary: This procedure defines the information retrieved from the shelf level GUI display for
the FE1 FRS card status. User must have the GUI launched and accessed the shelf level GUI
display per NTP-007 prior to performing this procedure.
1. Double click on the FE1 FRS card located in the shelf level GUI "Chassis View" at the top
of the window.
2. The FE1 FRS card display appears as shown in Figure 789-1. Click the small block
between the Status and Configuration sections and drag it downward to view all the status
information. Refer to Table 789-1 for definitions of status information provided.
3. Select each port on the card to view the port status.
4. Select Close button to return to the chassis level view.
Stop! You have completed this procedure.
Cellworx Vision: Card View - FE1 Frame Relay Service
NE Name: Cellworx1
NE Id: 21
Card: FE1 FRS
Slot Number: 13
Port Number: 1
FE1
FRS
ADC
Status
Active
APS
Port
1
2
3
4
5
6
7
8
Apply
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.

RETRIEVE FE1 FRS CARD STATUS

Status:
Card Level
Up
Operational State:
Available
Availability State:
Protection State:
Not Protected
Port Level
Line State:
Recieve:
No Alarm
RCV Far End LOF
RCV AIS
RCV Far End LOMF
RCV Test Code
Other:
LOF
LOS
Loopback State
Other Failure
Configuration:
Port Level
Chassis View
Refresh
RETURNS TO CHASSIS REPAINTS WINDOW
VIEW WITHOUT CLOSING TO REFLECT ANY
CARD LEVEL VIEW. CHANGES.
Figure 789-1. FE1 FRS Card Status Window
1152700 Issue 1 February 2001 Operation and Maintenance
X
Transmit:
XMT Far End LOF
XMT AIS
XMT Far End LOMF
CLICK ON BOX AND DRAG
UP OR DOWN TO EXPAND
STATUS OR CONFIGURATION
VIEWS.
Close
CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
© 2000, ADC Telecommunications, Inc.
DLP-789
Page 1 of 3
0026-010
Page 2-389