ADC FlexWave Prism System Reference Manual
  1. Manuals
  2. Brands
  3. ADC Manuals
  4. Network Hardware
  5. FlexWave Prism
  6. System reference manual

ADC FlexWave Prism System Reference Manual

Host, remote and ems 5.1
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
™
ADC FlexWave
Prism
Host, Remote and EMS 5.1
System Reference
ADCP-77-073 Issue 2 11/2009
Quad Band
Remote Unit
Host Unit
Antenna
Antenna
Antenna
77073-001
Antenna
D-620098-0-20 Rev B
CORNING EX1005, page 001
IPR2021-00762

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FlexWave Prism and is the answer not in the manual?

Questions and answers

Related Manuals for ADC FlexWave Prism

Summary of Contents for ADC FlexWave Prism

  • Page 1 ™ ADC FlexWave Prism Host, Remote and EMS 5.1 System Reference ADCP-77-073 Issue 2 11/2009 Quad Band Remote Unit Host Unit Antenna Antenna Antenna 77073-001 Antenna D-620098-0-20 Rev B CORNING EX1005, page 001 IPR2021-00762...
  • Page 2 CD. In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits, and ADC further disclaims any and all liability for indirect, incidental, special, consequential or other similar damages.

  • Page 3: Table Of Contents

    1.6 Fiber Optic Transport ..................17 1.7 Timeslots Versus Bandwidth ................19 1.8 Bandwidths ...................... 20 1.9 AWS and PCS Band Options ................24 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page iii ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.
  • Page 4 3.3.9 Computer Connection (Craft) ..............80 3.3.10 System Alarm Connections................ 81 3.3.11 Power Connections................... 83 Page iv FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 004...
  • Page 5 5.3 Product Identity ....................139 5.4 EMS Menu Bar ....................140 5.5 EMS Alarm Indications ..................141 5.6 EMS System Requirements ................142 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page v ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 6 9.5 Viewing the Host SeRF Summary ...............222 9.6 Viewing Host SeRF Optical Ports .................224 9.7 Viewing Host DART Alarms ................226 Page vi FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 006...
  • Page 7 12.5.3.2 Variable Bindings ................288 12.5.3.3 View the Traps................290 12.6 FlexWave-URH Agent MIB................292 12.7 Traps ......................308 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page vii ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 007...
  • Page 8 Appendix C: Glossary __________________________________ 331 Appendix D: Contacting ADC ____________________________ 335 Index ______________________________________________ 337 Page viii FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 008...

  • Page 9: Preface

    Throughout this publication, all items referenced as “accessory items” are not furnished with the basic product and must be purchased separately. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page ix ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 10: Flexwave Prism User Documentation

    ADC FlexWave Prism systems. Familiarity with SNMP and common network technologies is required. Each FlexWave Prism document describes a different aspect of the FlexWave Prism system. The following manuals correspond to this FlexWave Prism release: Title ADCP Number ADC®...
  • Page 11 —and closes the dialog. In a performance or status dialog, closes the dialog. Refresh Updates status information to reflect current conditions. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page xi ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 12: General Safety Precautions

    2 inches (5.1 cm). Exterior surfaces of the Remote may be hot. Use caution during servicing. Page xii FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 13: Standards Certification

    Safety Standards: • • IEC 60950-1, First Edition (CE marked) • • UL 60950-1 (File number E174166) (USA and Canada) FlexWave Prism Host, Remote and EMS 5.1 System Reference Page xiii ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 14 Intentionally Blank Page Page xiv FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 014 IPR2021-00762...

  • Page 15: Part I: Flexwave Prism System Overview

    RISM YSTEM VERVIEW FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 1 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 015 IPR2021-00762...
  • Page 16 Intentionally Blank Page Page 2 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 016 IPR2021-00762...

  • Page 17: Chapter 1: Flexwave Prism System

    1.9 AWS and PCS Band Options ................24 This section provides a basic description and application and configuration information about the FlexWave Prism system. Throughout this publication, all items referenced as “accessory items” are not furnished with the basic product and must be purchased separately.

  • Page 18: Prism System Overview

    • • Support for millimeter wave backhaul • • With its unique use of wideband digital RF transport, FlexWave Prism delivers reliable and consistent performance in all environments. Signals are not affected by reflection, dispersion, or frequency attenuation over fiber.

  • Page 19: Applications

    • • Corporate and university campuses • • Stadium and large public venues • • Next-generation network augmentation FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 5 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 20: Basic System Components

    Coarse Wavelength Division Multiplexer (CWDM) system, and expansion panels are available as accessories. Control and monitoring functions are provided by the FlexWave Element Management System (EMS). Some examples of FlexWave Prism Systems are shown in Figure 1-1, Figure 1-2, Figure 1-3.
  • Page 21 Base Transceiver Stations Figure 1-1. Multiple Point-to-Point Configuration (One Band per Remote, Three Nodes) FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 7 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 021...
  • Page 22 Band C Band C Base Transceiver Stations Figure 1-2. Four Remote Simulcast, Three Bands Page 8 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 022 IPR2021-00762...
  • Page 23 Band B Band C Base Transceiver Stations Figure 1-3. Three Bands to One Remote FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 9 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 023 IPR2021-00762...

  • Page 24: Multi-Host Systems

    ULTI YSTEMS ADC’s FlexWave Prism provides a Multi-Host feature that allows a Prism Remote to be shared by multiple Host Units. To accomplish this: • • One Host is designated as the IP Manager for a set of Remotes; this Host can serve as IP manager for multiple Remotes.
  • Page 25 Host 2 Location B Band C Base Transceiver Station Figure 1-4. Multi-Host System FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 11 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 025 IPR2021-00762...

  • Page 26: Dart Cards

    A/D) and Serial RF (SeRF) to/from SeRF board • • perform adjustable delay processing. Page 12 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 026...

  • Page 27: Darts And Host Units

    Genreic representation of a Classic DART or Single SuperDART Dual SuperDART 77073-076 Figure 1-5. DART Cards FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 13 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 027...
  • Page 28 Slots 5 And 7 in Slots 6 And 8 77073-078 Figure 1-7. Host with Dual SuperDARTs Page 14 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 028 IPR2021-00762...

  • Page 29: Darts And Remote Units

    The configuration of the DART cards provide the RF spectrum. Prism Remote RF Modules are not field serviceable. To replace a DART within a Prism Remote, you must replace the RF Module. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 15 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 30: E911 Support

    POWER BOARD FAN CARD Figure 1-8. 8:1 Analog Simulcast U-TDoA E911 Support Diagram Page 16 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 030 IPR2021-00762...

  • Page 31: Fiber Optic Transport

    5 MHz of digitized RF spectrum. Utilizing the full 12 timeslots yields between 60 and 75 MHz of total digitized RF on each SeRF Small Form-Factor Pluggable (SFP) laser connection. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 17 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 32 10MHz, 2 timeslots AWS B 10MHz, 2 timeslots Total = 35MHz, 7 timeslots Page 18 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 032 IPR2021-00762...

  • Page 33: Timeslots Versus Bandwidth

    5 MHz of digitized RF spectrum. Utilizing the full 12 timeslots yields between 60 and 80 MHz of total digitized RF on each SeRF SFP laser connection. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 19 ADCP-77-073 •...

  • Page 34: Bandwidths

    FlexWave Prism System ANDWIDTHS In the FlexWave Prism system, there are different Bandwidths from which to select, ranging from 5 to 75 MHz. The different bandwidths allow you to configure the system to use any contiguous or non-contiguous blocks within the 35 MHz of a single Host 6-timeslot DART or 60-75 MHz using a 12-timeslot DART.
  • Page 35 1880 PCS B2 1955 1960 1875 1880 PCS B2+B3 1955 1965 1875 1885 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 21 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 035 IPR2021-00762...
  • Page 36 1880 PCS E 1965 1970 1885 1890 PCS E+F 1965 1975 1885 1895 Page 22 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 036 IPR2021-00762...
  • Page 37 SMR G + AWS H 1990 2000 1910 1920 UMTS 2100 2110 2170 1920 1980 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 23 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 037 IPR2021-00762...

  • Page 38: Aws And Pcs Band Options

    Prism Host Prism Remote DART DART SeRF SeRF Duplexor Duplexer/ DART DART 77073-028 Page 24 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 038 IPR2021-00762...
  • Page 39 If the two PCS reverse path blocks are combined at the Host location, then they must be separated by at least 5 MHz to insure that the reverse paths do not interfere with each other during the re- combining. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 25 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 40 FlexWave Prism System Intentionally Blank Page Page 26 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 040 IPR2021-00762...

  • Page 41: Chapter 2: Prism System Components

    2.5 Prism System Specifications ................56 2.5.1 Host Unit Specifications ................56 2.5.2 Remote Unit Specifications................57 2.5.3 System Nominal Optical Specifications............58 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 27 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 42: Flexwave Prism Family Overview

    RF signals over extended distances, without the RF degradation that normally results when analog systems are impacted by optical effects. The basic function of the FlexWave Prism platform is to transport via fiber optic cable RF signals from a Base Transceiver Station (BTS) to an antenna interface allowing communication to a mobile device.
  • Page 43 FlexWave Prism Family Overview The basic function of FlexWave Prism simulcast (point-to-multipoint) is to transport, via fiber optic cable, RF signals from a Base Transceiver Station (BTS) to multiple antenna interfaces allowing communication to a mobile device (see Figure 2-2). Up to 8 simulcast Remotes are supported.

  • Page 44: Flexwave Prism Host Units

    Unless noted otherwise, views of the Host in this document show the mounting brackets in the 23- inch position. The default is the 19- inch position. Page 30 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 45 • RED • Power supply out of tolerance • OFF • No power present FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 31 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 045...
  • Page 46 10 MHz reference clock output that may be coaxial connector used to synchronize between multiple host units. Page 32 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 046 IPR2021-00762...

  • Page 47: Host Network Connection

    Host Network Connection The SeRF front panel has a Network port that creates a network connection between the Host and the network to monitor and configure the FlexWave Prism system through the FlexWave EMS. The network interface connection between the Host and the network is supported by a Gigabit Ethernet (10/100/1000) RJ-45 jack with integrated green ACTIVITY and LINK LEDs.

  • Page 48: Host System Card

    When the internal clock is not used the clock can be obtained from an external 10 MHz input. Page 34 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 49: Prism Remote Units

    Single-Band Remote Dual-Band Remote Tri-Band Remote Quad-Band Remote 77073-007 Figure 2-4. Prism Remote Units FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 35 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 049 IPR2021-00762...

  • Page 50: Handset Interface

    • • Linear Power Amplifier (LPA) • • Duplexer with a Low Noise Amplifier (LNA) • • Solar shield Page 36 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 050...
  • Page 51 Remote Slot MOD A RF Module / Band A SeRF module 77073-009 Figure 2-5. Prism Remote Components FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 37 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 051...

  • Page 52: Remote Rf Modules

    4 RF module slots module slots 77073-019 Figure 2-6. RF Modules in Prism Remotes Page 38 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 052 IPR2021-00762...
  • Page 53 Mounting Linear Power latch hook Amplifier (LPA) Duplexer Figure 2-7. Remote RF Module FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 39 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 053 IPR2021-00762...

  • Page 54: Remote Duplexer And Low Noise Amplifier

    77073-050 Low Noise Amplifiers in Duplexer Figure 2-8. Remote Duplexer with Low Noise Amplifiers Page 40 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 054...

  • Page 55: Linear Power Amplifiers

    75347-0006 Figure 2-9. Linear Power Amplifier The FlexWave Prism Remote 40W RF Module is designed for AWS and PCS frequencies. The Prism Remote 40W RF Module comprises one DART, two Linear Power Amplifiers (LPAs), and one or two Remote DART Interface (RDI) boards (two for a diversity module and one for a non-diversity module).
  • Page 56 +3dBm. The LPA is housed within the Duplexer, and is not field serviceable. Page 42 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 056...

  • Page 57: Remote Serf Modules

    SeRF module Power Supply Bottom of Remote Enclosure 77073-039 Figure 2-10. Remote SeRF Module FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 43 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 057 IPR2021-00762...

  • Page 58: Remote Power Supply And Cable Assembly

    For further information on calculating required power, see “Power Consumption” on page 129. Page 44 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 058 IPR2021-00762...

  • Page 59: Solar Shield

    Solar Shield is open, Solar Shield and Remote door are open Remote door is closed Figure 2-12. Solar Shield FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 45 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 60: Mounting Bracket (Remotes)

    (2) Four pairs of Mounting Hooks 77077-007 Figure 2-13. Prism Back View—Mounting Components Page 46 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 060 IPR2021-00762...

  • Page 61: Remote Connectors

    100-240 VAC 50-60 Hz 16 AMPS 77073-017 Figure 2-14. FlexWave Prism Remote Unit User Interface FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 47 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 061...
  • Page 62 Mod A/RF Module A is the bottommost Module in a Remote and Mod D/RF Module D is the topmost module in a Quad-Band Remote. Page 48 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 63: Remote Fiber Connector Cable Assembly

    An alarm is generated if a high temperature condition occurs within the enclosure. The maximum ambient operating temp is 50°C (122°F). FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 49 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 64: Prism System Accessories

    REVERSE PATH UNITS DIVERSITY REVERSE PATH 77073-053 Figure 2-15. Wavelength Division Multiplexer Application Page 50 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 064 IPR2021-00762...

  • Page 65: Course Wavelength Division Multiplexer System (Accessory)

    • 1510 nm • • 1590 nm • • 1530 nm • • 1610 nm FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 51 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 065 IPR2021-00762...
  • Page 66 CWDM Mux/DeMux unit and Figure 2-19 shows the CWDM Fiber Cable Assembly. For further information on the Prism CWDM system, see the ADC FlexWave™ Prism Coarse Wavelength Division Multiplexer User Manual (ADCP-75-353). LEFT SIDE PORTS (DEMUX) RIGHT SIDE PORTS (MUX)
  • Page 67 77073-057 Figure 2-19. CWDM Fiber Cable Assembly The Prism CWDM system works with ADC’s 7- and 3.5-inch industry-standard WideVAM chassis to ensure consistent, superior cable management within the frame. The 3.5-inch standard VAM chassis fits into any 19-inch rack mounting environment.
  • Page 68 Prism System Components The 7-inch standard VAM chassis fits into any open chassis location within an existing ADC 7-inch panel system or in an LGX® compatible frame. It accommodates a maximum of six components, in any combination of the following: •...

  • Page 69: Millimeter Wave Systems (Accessory)

    A Millimeter Wave (MMW) system with a data rate of not less than 3 Gbps (that meets the FlexWave Prism data rate performance and BER requirements) may be used in applications where it is desirable or necessary to bridge an open span and where it is impractical to lay a fiber optic cable.

  • Page 70: Prism System Specifications

    Network and Craft connectors RJ–45 jack Reliability at 25ºC MTBF 200,000 hours Including fans Page 56 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 070 IPR2021-00762...

  • Page 71: Remote Unit Specifications

    100 to 240 VAC, 50 to 60 Hz Operating range 90 to 265 VAC Current rating 15 AMPS FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 57 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 72: System Nominal Optical Specifications

    < –50 dB All input ports All specifications apply after a five minute warm-up period. Page 58 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 072...
  • Page 73 Prism System Specifications Intentionally Blank Page FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 59 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 073 IPR2021-00762...
  • Page 74 Prism System Components Page 60 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 074 IPR2021-00762...

  • Page 75: Part Ii: Host And Remote Installation

    OST AND EMOTE NSTALLATION FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 61 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 075 IPR2021-00762...
  • Page 76 Intentionally Blank Page Page 62 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 076 IPR2021-00762...

  • Page 77: Chapter 3: Installing The Host Unit

    This section provides the installation procedures for the Host and the WDM Host module (accessory item). Installation of the Remote components may proceed separately from installation of the Host. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 63 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 78: Before Starting Installation

    • • Make sure all cable runs are mapped out. • • Identify and obtain all tools and materials required to complete the installation. Page 64 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 79: Tools And Materials

    • • High performance, flexible, low-loss 50-ohm coaxial cable • • QMA-type male connectors • • Wire ties FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 65 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 80: Install The Host

    To insure that all optical connectors remain dust- free during installation, leave all dust caps and dust protectors in place until directed to remove them for connection. Page 66 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 81 11 1 Slide each cable guide into position for installation and then securely tighten the corresponding mounting screws. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 67 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 82: Osp Fiber Cable Installation Guidelines

    Figure 3-1. Typical Fiber Optic Cable Routing Page 68 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 082...

  • Page 83: Chassis Ground Connection

    16 6 Cut the chassis grounding wire to length and connect it to the approved ground source as required by local code or practice. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 69 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 84: Coaxial Cable Connections

    Connect the reverse path cable to the REV RF OUT connector on the Host DART front panel. Page 70 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 85 23 3 Dress and secure cables at the right side of the Host. 24 4 Complete all remaining coaxial connections as specified in the system design plan. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 71 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 86: Optical Connections

    This practice also prevents dirt particles from entering the connector. Page 72 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 87: Lc Attenuator

    There is an option of ordering the WDM with a fiber pigtail. The document for the WDM option describes using the LC attenuator option and requires an additional fiber patch cord. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 73 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 88: Optical Connections Without Wdm System

    Do not apply more pulling force to the cable than specified. Page 74 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 89 35 5 Repeat this procedure for the remaining SeRF SFPs in the Host. 36 6 Store any excess patch cord slack at the fiber distribution panel or storage panel. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 75 ADCP-77-073 •...

  • Page 90: Optical Connections For Systems With A Wdm

    To/From Remote Unit 1 To/From Remote Unit 1 Fiber Distribution Panel (FDP) 77073-065 Page 76 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 090 IPR2021-00762...
  • Page 91 Host from the right side of the rack may exceed the bend radius limitations for the optical fiber. 47 7 (Optional) If adding CWDM accessories, see the ADC FlexWave™ Prism Coarse Wavelength Division Multiplexer User Manual (ADCP-75-353) for installation information.

  • Page 92: Ext Ref Connections

    48 8 Connect one end of the EXT REF interface cable (accessory) to the EXT REF OUT port on Host #1. 77073-066 Page 78 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 092...
  • Page 93 Host) 77073-034 50 0 Repeat Step 49 for each additional Host that is added to the network. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 79 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 94: Computer Connection (Craft)

    The SeRF front panel provides a Craft port that provides an Ethernet interface that allows you to connect a computer to access the EMS. 51 1 Connect one end of an Ethernet cable (CAT5 or better, not provided by ADC) to the Host Craft port as shown below.

  • Page 95: System Alarm Connections

    10 Remote Major Normally Closed 11 Remote Major Common 12 Remote Major Normally Open FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 81 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 095...
  • Page 96 (whichever is required by the alarm system) on the Host System card alarm terminal connector (supplied with Host System card). 77073-068 Page 82 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 096...

  • Page 97: Power Connections

    GMT fuse: • • 5 Amp GMT fuse for 48Vdc • • 10 Amp GMT fuse for 24 Vdc FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 83 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 98 64 4 Route the wires to the terminal block on the Host Power Supply and cut them to length, allowing sufficient length for termination. Page 84 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 99 When connecting the equipment to the supply circuit, check equipment nameplate ratings to avoid overloading circuits which may cause damage to over- current protection devices and supply wiring. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 85 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 100 SYNTH LED Craft port SW FLT LED 77073-074 DC power switch Power LED Page 86 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 100 IPR2021-00762...

  • Page 101: Installing The Wdm Host Module Mounting Shelf And Wdm Host Module

    3-4. Note that the WDM enables up to three Prism RF bands to operate on a single OSP fiber. Figure 3-4. WDM System FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 87 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 102 23 dB less than the input power going into Port 1. The wavelength of light measured is 1550 nm. Page 88 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 103 Figure 3-7 shows a one Host WDM system. 77073-061 Figure 3-7. One Host WDM System FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 89 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 103...

  • Page 104: Install Wdm Host Components

    WDM modules in the WDM Host module mounting shelf. Page 90 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 104...
  • Page 105 Connections For Systems With a WDM” on page 76. Or, after connecting the fiber patch cord, correctly store the slack cable. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 91 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 106 Installing the Host Unit Intentionally Blank Page Page 92 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 106 IPR2021-00762...

  • Page 107: Chapter 4: Installing The Remote Unit

    4.4.9 Determine the Circuit Breaker or Fuse for Remote.........129 4.4.9.1 Power Consumption ................129 4.4.9.2 Power Consumption Tables..............131 4.4.10 Mount the Remote and Power Up ..............132 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 93 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 108: Remote Installation Overview

    (a) If the Remote has more than 2 SFPs, two Quad Fiber Cable Assemblies are required. Page 94 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 108...

  • Page 109: Required Tools And Materials

    • • N-Type male connectors • • RJ-45 connector (if making a permanent external network cable connection) FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 95 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 110: Remote Mounting Plans

    Installing the Remote Unit EMOTE OUNTING LANS The FlexWave Prism Remote Unit has a low profile design that requires minimal real estate for installation. The basic dimensions and weights of the Remote are listed in Table 4-2. Table 4-2. Remote Dimensions...

  • Page 111: Install The Remote

    4 4 Save all shipping containers for use if the equipment requires shipment at a future date. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 97 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 112: Install The Remote Rf Module(S)

    Mod D RX1 Diversity receive for RF power from the antenna for RF Module D Page 98 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 112...
  • Page 113 Mounting Hook is toward the Receiving flange on the Remote chassis. Always install RF Modules from the bottom up and do not skip a shelf. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 99 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 114 RF Module shelf. MOD D MOD C MOD B MOD A SeRF Module 77073-040 Page 100 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 114 IPR2021-00762...
  • Page 115 Remote heat sink, and slide the RF Module in toward the flange until it can go no further. Chassis Receiving flange RF Module Mounting hook 77073-044 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 101 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 115 IPR2021-00762...
  • Page 116 If you later cannot shut the Remote door, verify that the RF Module is installed correctly. 77073-045 Page 102 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 116...
  • Page 117 Step 14 4 Position the cables so that are under the right edge of the RF Module, pointing up. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 103 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 118 Connect the Power cable to the connector. This connects the RF Module to the DC power connection. Page 104 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 118...
  • Page 119 Panel as indicated by the dashed line in the preceding figure. Failure to correctly position the cables could inhibit closing the Remote door, which can result in damage to the cables. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 105 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 120 19 9 Repeat Step 5 through Step 18 to install other RF Modules. Page 106 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 120 IPR2021-00762...

  • Page 121: Install Any 40W Rf Module(S)

    In the following steps, the RF cables and connectors are referred to as MOD N TRX1 and as where equals , or FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 107 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 121 IPR2021-00762...

  • Page 122: Prepare The Remote And Rf Module

    • Module C Shelf for a Tri-Band chassis • Module B Shelf for a Dual-Band chassis Page 108 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 122...
  • Page 123 Discard or store the module shelf and fasteners. Use 9/64” Allen wrench to remove the three Module Shelf screws 77072-003 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 109 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 124: Install The 40W Rf Module

    RF Module shelf, as shown below: Installing a dual-slot RF Module 77072-004 Page 110 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 124...
  • Page 125 Remote heat sink, and slide the RF Module in toward the flange until it can go no further. Chassis Receiving flange RF Module Mounting hook 77073-044 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 111 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 125 IPR2021-00762...
  • Page 126 Now in Step 12, you are pushing the RF Module back into the chassis until it can go no further. 77072-008 Page 112 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 127 Step 9 on page 100 through Step Position the cables so that are under the right edge of the RF Module, pointing FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 113 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 128 MOD N RX1, ensuring that the cable bundle will not be pinched or prevent the Remote door from closing. Page 114 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 129 Power (PWR) cable to the RF cable labeled MOD N RX1, ensuring that the cable bundle will not be pinched or prevent the Remote door from closing. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 115 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 130 Remote door, which can result in damage to the cables. Page 116 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 131 AC Power DC Power switch for Mod A switch for Remote chassis 77079-002 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 117 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 131 IPR2021-00762...

  • Page 132: Ground Wire Installation

    Ring Terminal 10-32 Keps Nut Ground Wire 77073-014 To Earth Ground Partial Bottom View Page 118 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 132 IPR2021-00762...

  • Page 133: Network Cable Installation

    19 9 Align the plug end of the RJ-45 cable connector with the RJ-45 port receptacle and then insert the cable plug into the port receptacle. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 119 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 134 It may be necessary to apply 30 to 50 in-lbs (3.4 to 5.6 Nm) of torque to the connector nut in order to turn it past the indented position. Page 120 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 135: Quad Fiber Cable Installation

    POWER 100-240 VAC 4 BX5 connectors. 50-60 Hz 16 AMPS 77073-011 Bottom View FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 121 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 135 IPR2021-00762...
  • Page 136 POWER 100-240 VAC 50-60 Hz 16 AMPS BX5 CABLE CONNECTOR 77073-012 Bottom View Page 122 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 136 IPR2021-00762...

  • Page 137: Antenna Cable Installation

    1640 Watts EIRP and the antenna must be permanently installed in a fixed location that provides at least 6 meters (20 feet) of separation from all persons. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 123 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 138 FIBER 2 POWER 100-240 VAC 50-60 Hz 16 AMPS Antenna cable Bottom View 77073-013 Page 124 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 138 IPR2021-00762...

  • Page 139: Ac Power Wiring Installation

    For additional information, consult with the ADC Technical Assistance Center (see “Contacting ADC” on page 335). FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 125 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 140 An appropriate disconnect device, as well as branch circuit protection, must be provided as part of the installation. Page 126 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 141 AC power cable for proper voltage levels and correct polarity. 43 3 When testing is complete, place the circuit breaker in the OFF position. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 127 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 142 46 6 Tighten coupling nut until the green band at the top of the connector body is visible. Page 128 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 143: Determine The Circuit Breaker Or Fuse For Remote

    • RF bandwidth? • DART type (Classic, Single SuperDART or Dual SuperDART) • Diversity or Non-Diversity? FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 129 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 143...
  • Page 144 51 1 Determine the circuit breaker or fuse size based on local codes and practices. Circuit breaker or fuse size must be 20 Amps or less. Page 130 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 145: Power Consumption Tables

    Classic DART 6.5W CELL or RF Module 6.5W ESMR Diversity Non-Diversity 20W CELL Diversity FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 131 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 145 IPR2021-00762...

  • Page 146: Mount The Remote And Power Up

    Installing the Remote Unit 4.4.10 Mount the Remote and Power Up 52 2 Refer to the detailed instructions for mounting the FlexWave Prism Remote in the Remote Unit Mounting Kit Installation Instructions (ADCP-77-077) to mount the Remote in the location selected in Section 4.2, Remote Mounting Plans, on page...

  • Page 147: Part Iii: System Setup And Management

    YSTEM ETUP AND ANAGEMENT FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 133 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 147 IPR2021-00762...
  • Page 148 Intentionally Blank Page Page 134 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 148 IPR2021-00762...

  • Page 149: Chapter 5: Flexwave Element Management System

    5.4 EMS Menu Bar ....................140 5.5 EMS Alarm Indications ..................141 5.6 EMS System Requirements ................142 This chapter introduces the ADC FlexWave Prism Element Management System (EMS). FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 135 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 150: Flexwave Ems Overview

    FlexWave Element Management System EMS O VERVIEW The ADC FlexWave EMS is an embedded software application that is accessed through an internet connection using a Web browser and provides a Graphical User Interface (GUI) for control and monitoring of a Prism system.
  • Page 151 REMOTE Element (Optional) Management System 77073-021 Figure 5-2. The Function of the EMS FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 137 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 151 IPR2021-00762...

  • Page 152: Ems Graphical User Interface

    “EMS Menu Bar” on page 140. Figure 5-3. EMS Screen Example Page 138 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 152 IPR2021-00762...

  • Page 153: Product Identity

    Product Identity RODUCT DENTITY The FlexWave Prism system comprises a mix of URH Hosts and Prism Remotes. The system components are therefore identified as follows in the EMS: • • Login screens— ™ ADC FlexWave Prism&URH • • Summary views—...

  • Page 154: Ems Menu Bar

    Opens a window that provides the software-release version of the EMS, and copyright and trademark information. Logout Logs you out of the EMS. Page 140 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 154 IPR2021-00762...

  • Page 155: Ems Alarm Indications

    Figure 5-5. Example of Alarm Indicators For further information on EMS alarms, see “Managing Alarms” on page 257. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 141 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 156: Ems System Requirements

    EMS interface. Page 142 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 156...

  • Page 157: Chapter 6: Initial Prism System Setup

    10 sections. Only a user logged in under the admin account can complete the initial Prism setup through the EMS. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 143 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 158: Access The Ems

    If you have configured your Prism system with static IP addresses, enter the assigned IP address instead of 192.168.0.1. Page 144 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 159 4 4 When the window opens: ADC FlexWave Prism&URH Embedded Web Server Welcome In the box, type the user name provided by ADC or by the Network Username Administrator. The default user name is admin. b b In the box, type the password provided by ADC or by the Network Password Administrator.

  • Page 160: Discover Ip Addresses

    • • Remote5 _________________________ • • Remote6 _________________________ • • Remote7 _________________________ • • Remote8 _________________________ Page 146 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 160 IPR2021-00762...

  • Page 161: Enter A Host Name, Clock Source, And Linking Mode

    Numerals are allowed, but cannot be the first character of the name. 11 and again at 15 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 147 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 162 10MHz + /- 5ppm, communication between the Host and Remote over the optical fiber will fail. Page 148 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 163 15 5 Click to save the changes. Apply 10 MHz Reference Clock Linking Mode FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 149 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 163 IPR2021-00762...

  • Page 164: Set The Clock Priority Level

    For information on the SeRF alarm indicators, see “Viewing the Host SeRF Summary” on page 222. Page 150 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 164 IPR2021-00762...

  • Page 165: Provision The Host Serf Optical Ports

    Ip Enable only one of the fibers connected to the Remote will have IP. 22 2 Click Apply FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 151 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 166: Configure The Host Darts

    DART to be Information Band-Config configured. Page 152 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 166 IPR2021-00762...
  • Page 167 Diversity selection therefore determines whether the DART card being configured will carry the primary or secondary RF path. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 153 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 168 AWS DARTs • for Fullband GSM1800, UMTS, Fullband AWS, and EGSM900 31 dB Page 154 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 168 IPR2021-00762...
  • Page 169 Dual PCS uplink splitting causes a 3 dB degradation in the noise figure. 26 6 Click and then Apply Close FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 155 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 169...

  • Page 170: Enter A Remote Name

    “Monitoring a Remote Unit” on page 240.) Remote Unit Page 156 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 170 IPR2021-00762...
  • Page 171 Function Explorer Tree and the Remote Name Remote view. Unit FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 157 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 171...

  • Page 172: Configure The Remote Serf Optical Ports

    Ip Enable alarms, see “Viewing Host SeRF Optical Ports” on page 224. 32 2 Click Apply Page 158 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 172 IPR2021-00762...

  • Page 173: Link The Host And Remote Darts

    • • Dual SuperDARTs support up to 75 MHz of RF – GSM1800 – UMTS – AWS Fullband FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 159 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 173 IPR2021-00762...

  • Page 174: Rf Groups In The Remote And The Ems Gui

    Alarm Summary of RF Groups RF Module, the slot is shown with a white indicator. Page 160 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 174...
  • Page 175 White indicator to indicate that a configurable DART is not present. Figure 6-3. RF Groups in the FlexWave EMS FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 161 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 176: Link A Remote Dart To A Host Dart

    (top row, circled in red) is assigned to Host DART ID 1 DCS Full Band Page 162 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 176...
  • Page 177 36 6 To link the Host DART to the Remote DART for this pass band, click in the radio button next to Host DART Id (ID in this example). FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 163 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 178 RF. For information on connecting the antenna, see “Antenna Cable Installation” on page 123. Page 164 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 178 IPR2021-00762...
  • Page 179 . For example, for a DART Input Level of -25dBm, the Host FWD DART Forward Gain Gain setting would be 31dB and the Remote FWD Gain setting would be 28dB. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 165 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 180 REV delay values are usually the same because the fiber path between the two is typically the same. 42 2 Click Apply Page 166 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 180 IPR2021-00762...

  • Page 181: Conclude Initial System Setup

    “Changing Your Own Password” on page 208 to change the password for the default admin user. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 167 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 181...

  • Page 182: Optional) Configuring Multi-Host Systems For Manual Mode

    DART to be Information Band-Config configured. Page 168 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 182 IPR2021-00762...
  • Page 183 (Optional) Configuring Multi-Host Systems for Manual Mode FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 169 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 183 IPR2021-00762...
  • Page 184 If you are linking to more than one Remote, the same timeslots must be used on all fibers for this DART. Page 170 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 185 - 11 dBm can be handled (CDMA peak to average is typically 10- 12 dB). If the peaks exceed the 14 dB of headroom, then Automatic Level Control (ALC) will occur to prevent over- driving the A/D Converter. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 171 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 186 Initial Prism System Setup 7 7 Click Apply Page 172 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 186 IPR2021-00762...

  • Page 187: Configure The Remote Darts

    DART Diversity Status nonDiversity diversity application, one DART will be configured for the primary nonDiversity FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 173 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 187 IPR2021-00762...
  • Page 188 • • Remote 1 has 5 miles of fiber (40 usec of fiber delay). • • Remote 2 has 10 miles of fiber (80 usec of fiber delay). Page 174 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 189 The FWD and REV delay values are usually the same because the fiber path between the two is typically the same. 13 3 Click Apply FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 175 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 190 To unlink the Remote DART, click on the checkbox in the fiber timeslot table (at the bottom of the window) in the Unlink column and then click Apply. Page 176 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 191: Chapter 7: Using The Ems To Manage A Prism System

    7.4.2 EMS Access Methods .................188 7.4.2.1 Accessing the EMS Through the Remote Network Port......189 7.4.2.2 Accessing the EMS Through the Remote Craft Port ........192 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 177 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 192: Displaying The System View

    DHCP. If a static IP address has been assigned to the Remote, the actual IP address for the Remote will display when the Host is not connected. Page 178 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 193: Setting Auto Refresh

    ) between EMS Auto Refresh Time 1800 auto refreshes. 4 4 Click Apply FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 179 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 193 IPR2021-00762...

  • Page 194: Working With The System Inventory

    “Remote Inventory Tables” on page 182 describes the tables at the bottom of the view. Page 180 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 194...

  • Page 195: System Inventory And Host Inventory Tables

    • —Software Version of the Ethernet Monitor process running on the ENETMon SwVer Host or Remote FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 181 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 195...

  • Page 196: Remote Inventory Tables

    —ADC part number for the module Part Number 7.3.1.2 Remote Inventory Tables Figure 7-2. Remote Inventories Page 182 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 196 IPR2021-00762...
  • Page 197 —Unique serial number for the module Serial Number • —ADC part number for the module Part Number FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 183 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 197...

  • Page 198: Working With Prism System Network Interfaces

    IP address for the Host and subtended Remotes. Page 184 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 198...

  • Page 199: Working With Prism System Network Interfaces

    You can reach the address Remote via telnet 10.0.0.1 or ssh from the Host. (http://10.0.0.1) FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 185 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 199 IPR2021-00762...

  • Page 200: Changing To Built-In Network Mode

    Craft port to run a DHCP client instead of using the IP address 192.168.0.1. 3 3 Click Apply Page 186 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 200...
  • Page 201 5 5 Disconnect the Ethernet cable from the Host Craft port and connect it to the Host Network port. RJ-45 CONNECTOR DETAIL 22403-A FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 187 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 201 IPR2021-00762...

  • Page 202: Ems Access Methods

    EMS. See “Accessing the EMS Through the Remote Network Port” on page 189. Page 188 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 202 IPR2021-00762...

  • Page 203: Accessing The Ems Through The Remote Network Port

    Network port. The maximum cable length is 300 feet (91.4 m). Use the following procedure to install the Network cable and then log in to the EMS. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 189 ADCP-77-073 •...
  • Page 204 It may be necessary to apply 30 to 50 lbs/force- inches (3.4 to 5.6 Nm) of torque to the connector nut in order to turn it past the indented position. Page 190 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 205 9 9 Click . The page opens. Welcome to ADC FlexWave Prism Embedded Web Server FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 191 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 205...

  • Page 206: Accessing The Ems Through The Remote Craft Port

    4 4 Remove the dust cap from the Craft port located on the SeRF Module. RJ-45 Craft port RJ-45 Connector 77073-025 Page 192 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 206 IPR2021-00762...
  • Page 207 The user name (viewer) and password (viewer) used to access the EMS through the Remote Craft port cannot be changed. 10 0 Click . The Welcome to ADC FlexWave Prism Embedded Web Server page opens. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 193 ADCP-77-073 •...
  • Page 208 Using the EMS to Manage a Prism System Intentionally Blank Page Page 194 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 208 IPR2021-00762...

  • Page 209: Chapter 8: Managing User Accounts

    8.5 Changing the Password of Another User ..............206 8.6 Changing Your Own Password ................208 8.7 Deleting a User Account ..................210 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 195 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 210: Flexwave Ems User Accounts

    FlexWave EMS prevents a login in which the user enters an invalid User ID or password. Page 196 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 210...

  • Page 211: Viewing User Accounts

    (see “Deleting a User Delete User Account” on page 210). FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 197 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 211...

  • Page 212: Adding A User Account

    EMS View Frame with a table that User Account Management lists all current user accounts. Page 198 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 212...

  • Page 213: Adding A User Account

    User Account Management In the graphic above, a user account will be added to Host1_Region1 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 199 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 214 • —assigns the role of Network User, which provides read only networkUser permission. Page 200 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 214 IPR2021-00762...
  • Page 215 10 0 In the view, click to display the newly added User Account Management Refresh user(s). FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 201 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 215 IPR2021-00762...

  • Page 216: Changing A User Access Level

    2 2 Click the radio button that corresponds to the user whose account is to be edited. Page 202 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 217: Changing A User Access Level

    • —has read only permissions into the system. networkUser 6 6 Click Apply FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 203 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 217 IPR2021-00762...
  • Page 218 Change Access Level Close 8 8 In the view, click User Account Management Refresh Page 204 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 218 IPR2021-00762...
  • Page 219 If the user was logged on to the system during this procedure, the user needs to log off and then log back on again to put the new access level into effect. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 205 ADCP-77-073 •...

  • Page 220: Changing The Password Of Another User

    3 3 Click to open the window. Change Password Change Password Settings Page 206 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 220 IPR2021-00762...

  • Page 221: Changing The Password Of Another User

    The password changed successfully message displays: 5 5 Click to close the window. Close Change Password Settings FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 207 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 221 IPR2021-00762...

  • Page 222: Changing Your Own Password

    In the box, retype the new password. Re-enter Password d d Click Change Password Page 208 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 222 IPR2021-00762...

  • Page 223: Changing Your Own Password

    The password changed successfully message displays: 3 3 Log out of the EMS and then log back in to set your new password. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 209 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 224: Deleting A User Account

    4 4 In the confirmation dialog, verify that you selected the correct user to delete, and then click Page 210 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 225: Deleting A User Account

    Deleting a User Account The user account is removed from the EMS. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 211 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 225 IPR2021-00762...
  • Page 226 Managing User Accounts Intentionally Blank Page Page 212 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 226 IPR2021-00762...

  • Page 227: Chapter 9: Managing Host Units

    9.5 Viewing the Host SeRF Summary................222 9.6 Viewing Host SeRF Optical Ports .................224 9.7 Viewing Host DART Alarms ................226 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 213 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 228: Viewing The Host Summary

    This status indicator is red when a minor alarm is present on any Remote connected to Host. Page 214 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 229: Resetting The Host Unit

    EMS View Frame. Host Summary 2 2 Click Reset Unit FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 215 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 229...
  • Page 230 SET will fail. You cannot make configuration changes while this message is displayed. Wait until the message clears before continuing with configuration settings. Page 216 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 230...

  • Page 231: Viewing Host Serf Ethernet Ports

    ENET Host name) to open the view in the EMS View Frame. ENET Configurations FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 217 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 231...
  • Page 232 64 to 1518 length and contains a frame check sequence error Page 218 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 232...
  • Page 233 – —Transmit multicast packet counter. Increments for each Tx MultiCast Pkts. multicast valid frame transmitted (excluding broadcast frames) FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 219 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 234: Decommissioning A Dart In A Host

    Host name) to open the view in the EMS View Frame. DART’s Alarm Summary Page 220 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 234...

  • Page 235: Decommissioning A Dart In A Host

    Configuration and Alarm Details Decommission 4 4 In the confirmation dialog, click FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 221 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 235...

  • Page 236: Viewing The Host Serf Summary

    —state of the Host chassis fan. Red indicates that the Host chassis System Fan Fault fan is spinning too slowly. Page 222 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 236...

  • Page 237: Viewing The Host Serf Summary

    264. For information on setting the Clock Priority Level, see “Set the Clock Priority Level” on page 150. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 223 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 238: Viewing Host Serf Optical Ports

    Remote as described in “Viewing Remote SeRF Optical Ports” on page 248. Page 224 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 238 IPR2021-00762...

  • Page 239: Viewing Host Serf Optical Ports

    . Threshold cannot be changed. -27dBm • —name of the Remote connected to this Optics port. Remote Name FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 225 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 239...

  • Page 240: Viewing Host Dart Alarms

    Host- n corresponds to the DART whose (where link you selected). DART Band-Config Page 226 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 240 IPR2021-00762...

  • Page 241: Viewing Host Dart Alarms

    For corrective actions for alarm states, Refresh refer to “Troubleshooting Alarms” on page 264. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 227 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 241...
  • Page 242 Managing Host Units Intentionally Blank Page Page 228 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 242 IPR2021-00762...
  • Page 243 10.10 Viewing an Alarm Summary of the Remote RF Groups ........250 10.11 Viewing RF Band Alarm Details ...............252 10.12 Viewing Remote GPS Alarms and Location Parameters ........255 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 229 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.
  • Page 244 Rx FSC Errors has an integral 64 to 1518 length and contains a frame check sequence error Page 230 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 244...
  • Page 245 • —Transmit multicast packet counter. Increments for each Tx MultiCast Pkts. multicast valid frame transmitted (excluding broadcast frames) FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 231 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 246 RF Groups, see “RF Groups in the Remote and the EMS GUI” on page 160. Page 232 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 246 IPR2021-00762...
  • Page 247 DART needs to be decommissioned. 3 3 In the window, click the button. Configuration Details Decommission FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 233 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 247 IPR2021-00762...
  • Page 248 Managing Remote Units 4 4 In the confirmation dialog, click Page 234 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 248 IPR2021-00762...
  • Page 249 , the second LPA continues in its current state. Automatic alarm standby recovery is also handled independently. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 235 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 250 LPA Over Power Fault the LPA fault. If LPA Reset does not clear this alarm, the corresponding RF Module Page 236 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 251 Restarting an LPA may need to be replaced. Contact ADC Technical Assistance for further help (see “Contacting ADC” on page 335). • —Red indicates an internal VSWR fault state of the LPA. Check the LPA VSWR Fault Remote’s antenna connection. If the connection is good and a subsequent LPA reset does not clear the alarm, inspect the blue cable going from the corresponding Remote Antenna port to the Duplexer—verify that the connection...
  • Page 252 LPA needs to be reset. 5 5 In the window, click the button. Configuration Details LPA Reset Page 238 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 252 IPR2021-00762...
  • Page 253 Restarting an LPA 6 6 In the LPA Reset caution dialog, click OK. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 239 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 253 IPR2021-00762...
  • Page 254 -n summary that corresponds to the Prism Remote Unit Remote selected Remote ( -n). Remote Page 240 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 254 IPR2021-00762...
  • Page 255 Ports” on page 248. The GPS alarm is not supported at present; this status indicator will be white. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 241 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 256 Remote Name entry to be applied Apply • button—When clicked, causes page to be reloaded from Host Refresh Page 242 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 256 IPR2021-00762...
  • Page 257 Remote and removes all corresponding alarms from the EMS alarm summaries (see “Decommissioning a Remote Unit” on page 244). FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 243 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 258 -n). There should be a statement that communication Remote with the Remote has been lost. Page 244 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 258...
  • Page 259 Decommissioning a Remote Unit 3 3 Click Decommission Unit 4 4 In the confirmation dialog, click FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 245 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 259...
  • Page 260 Remote ( -n). Remote 2 2 Click the button. Reset Unit Page 246 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 260 IPR2021-00762...
  • Page 261 The Remote reboots (resets), which causes a Loss of Service until the Remote has returned to normal operation. Typical down time is two to four minutes. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 247 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 262 Remote number that corresponds to a Host SFP port number Remote# is the Remote name). Page 248 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 262...
  • Page 263 -27dBm • —Name of the Host at the other end of the fiber. Host Name FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 249 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 263...
  • Page 264 LPA. Yellow indicates that a Minor alarm is the highest-level alarm and Red indicates that a Major alarm exists for the LPA. Page 250 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 265 • • 40W RF Module AWS 2100 Non-Diversity Enclosure for Prism Remote installed in Slots B and A. The second LPA status is shown in Slot A. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 251 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 266 Remote number that corresponds to a Host SFP port Remote# number and is the Remote name). Page 252 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 266 IPR2021-00762...
  • Page 267 —Red indicates that the RF power measured at the antenna RF Power Fault output is too low. The threshold for this fault is 0 dBm FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 253 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 268 —Yellow indicates that the LPA internal LPA High Temperature Fault temperature is too high. Page 254 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 268...
  • Page 269 Remotes Remote# that corresponds to a Host SFP port number and is the Remote name). FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 255 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 269...
  • Page 270 Managing Remote Units Intentionally Blank Page Page 256 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 270 IPR2021-00762...
  • Page 271 • • Green indicates a normal (okay) state • • Grey indicates that the alarm has been masked • • White indicates that an associated device is unplugged or missing. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 257 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.

  • Page 272: Viewing Active Alarms

    Minor • —Date and time when the alarm occurred ( Time Stamp YYYY:MM:DD:HH:MM:SS Page 258 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 272 IPR2021-00762...

  • Page 273: Viewing An Alarm History Log

    Alarm Log History window includes the severity of if the alarm condition has been cleared. Clear FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 259 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 273...

  • Page 274: Masking An Alarm Type

    2 2 In the EMS Menu bar, select Alarm Management e window opens. Alarm Management Tabl Page 260 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 274 IPR2021-00762...
  • Page 275 Apply In the following graphic, a mask has been enabled for the SeRF Secondary Clock Priority Fault. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 261 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 276: Unmasking An Alarm Type

    2 2 In the EMS Menu bar, select Alarm Management e window opens. Alarm Management Tabl Page 262 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 276 IPR2021-00762...
  • Page 277 Apply In the following graphic, masking has been disabled for the SeRF Secondary Clock Priority Fault. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 263 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 277...

  • Page 278: Troubleshooting Alarms

    If persistent, consult ADC, replace DART Page 264 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 278 IPR2021-00762...
  • Page 279 Major Lock state of the If persistent, consult upconvertor ADC, replace DART synthesizer FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 265 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 279 IPR2021-00762...
  • Page 280 Check for IP conflict Page 266 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 280 IPR2021-00762...
  • Page 281 DART ADC, replace RF upconvertor/ Module downconverter and DART FPGA status FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 267 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 281 IPR2021-00762...
  • Page 282 Check remote temperature. Reset LPA. If persistent, consult ADC, replace RF Module Page 268 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 282 IPR2021-00762...
  • Page 283 One of the pluggable Replace or modules is missing decommission the on the Remote missing module FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 269 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 283 IPR2021-00762...
  • Page 284 If no SeRF alarm exists, FPGA is faulty; consult ADC, replace SeRF Page 270 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 284 IPR2021-00762...
  • Page 285 Remote is too signal or replace strong Host SFP with one of less strength FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 271 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 285...
  • Page 286 Minor Temperature is Check ambient below lower conditions acceptable limit (-40 degrees Farenheit) Page 272 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 286 IPR2021-00762...
  • Page 287 Minor Secondary Clock Set Secondary CPL Priority Fault within acceptable range FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 273 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 287 IPR2021-00762...
  • Page 288 Managing Alarms Page 274 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 288 IPR2021-00762...
  • Page 289 12.5.3.2 Variable Bindings ................288 12.5.3.3 View the Traps................290 12.6 FlexWave-URH Agent MIB................292 12.7 Traps ......................308 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 275 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc. CORNING EX1005, page 289...

  • Page 290: Ems Snmp Interface

    Figure 12-1. Figure 12-1. EMS SNMP Interface Example The FlexWave EMS SNMP interface can manage FlexWave Prism and URH units. This document describes how to use the SNMP interface with a Prism system. Page 276 FlexWave Prism Host, Remote and EMS 5.1 System Reference ©...

  • Page 291: Snmp Overview

    SNMP interface to “get” and “set” system parameters and receive alarms. In SNMP terminology, the parameters in a MIB are called “objects” and alarms are called “traps.” FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 277 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 292: Background Information On Snmp

    (within a single folder) represents one such table. An object marked with a key symbol indicates that view is the key value for that table. Page 278 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 293 For example, the MIB object “fwuHstDARTPassBand” corresponds to the “Host DART Pass Band” parameter on the Host DART Configuration and Alarm Details Page. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 279 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 294: Mib Used By Flexwave System

    12.2.2 MIB Used by FlexWave System The FlexWave system uses a single MIB called the ADC-FLEXWAVE-URH.mib. The MIB resides on the SeRF card in the Host where the EMS software also runs. The SNMP proxy agent software required for the interface with SNMP managers also resides and runs on the Host SeRF card.

  • Page 295: Snmp Procedures

    Examples shown in this chapter use the AdventNet MIB Browser. Some procedural details may vary with another browser, but the basic steps are the same. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 281 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 296: Accessing The Flexwave-Prism Agent Mib

    5 5 Enter the Read Community as public and Write Community as private. 6 6 To see an overview the MIB content, expand the MIB tree. Page 282 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...

  • Page 297: Configuring The Trap Viewer

    You can't use both a static and dynamic trap agent configuration. You can only use one or the other. If you configure static, the dynamic entries will be deleted. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 283 ADCP-77-073 •...

  • Page 298: (Dynamic-Adventnet Mib Browser)

    3 3 Set the common parameters such as , and Host Port and Community Write Community Page 284 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 298 IPR2021-00762...
  • Page 299 5 5 In the window that opens, click Start 6 6 In the window that opens, click to add the manager information. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 285 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 300 SNMP Table. 9 9 Click to close the SNMP Table. Close Page 286 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 300 IPR2021-00762...

  • Page 301: Viewing Traps

    00 through 59 For example, Tuesday February 26 at 1:30:15 PM would be displayed as: TUE, FEB 26, 13:30:15 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 287 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 302: 12.5.3.2 Variable Bindings

    You can therefore determine the affected module based on the module number and type (variable binding 5 and 6). Page 288 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009...
  • Page 303 8 8 Power Detector 9 9 LPA 10 0 LNA 11 1 Duplexer 12 2 GPS FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 289 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 303...

  • Page 304: 12.5.3.3 View The Traps

    Trap Viewer begins to receive traps from the specified port Start and community. Page 290 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 304...
  • Page 305 Parser Criteria. The configuration of the criterion is made possible by using the ParserEditor FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 291 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 306: Flexwave-Urh Agent Mib

    Number fwuHstSysCardRIDateCode Remote Inventory Data-Date DisplayString Code fwuHstSysCardRIHWVer Remote Inventory DisplayString Data-Hardware Version Page 292 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 306 IPR2021-00762...
  • Page 307 User assigned name of the DisplayString Host. It can be 40 characters long FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 293 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 307...
  • Page 308 Remote number from which REMOTENBRT the alarm has been raised Page 294 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 308 IPR2021-00762...
  • Page 309 DisplayString Monitor process running on the Host fwuHstSERFRIDateCode Host SeRF Inventory-Date DisplayString Code FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 295 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 309 IPR2021-00762...
  • Page 310 SFP Over Drive Fault; masking is disabled by default; if enabled, the trap will not be raised. Page 296 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 310 IPR2021-00762...
  • Page 311 Band type of Host DART card BANDType fwuHstDARTPassBand Pass-band type of host DART PASSBANDTyp card. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 297 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 311 IPR2021-00762...
  • Page 312 User defined name of the DisplayString Remote, which can be up to 40 characters long Page 298 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 312 IPR2021-00762...
  • Page 313 Software Version of the Remote system fwuRmtSERFRIDateCode Remote SeRF Inventory-Date DisplayString Code of the Remote system FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 299 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 313 IPR2021-00762...
  • Page 314 Page 300 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 314...
  • Page 315 32 characters fwuRmtDARTBandType Band type of Remote DART BANDType card FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 301 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 315 IPR2021-00762...
  • Page 316 Data-Hardware Version fwuRmtDARTGeneralTableRowStatus Status of a row in the DART RowStatus General table Page 302 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 316 IPR2021-00762...
  • Page 317 (from -180 to 180) fwuRmtGPSNumberOfSatellite The Number of satellites INTEGER discovered (from -180 to 180) FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 303 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 317...
  • Page 318 Number fwuRmtLNARISerialNumber LNA Inventory Data-Serial DisplayString Number fwuRmtLNARIDateCode LNA Inventory Data-Date DisplayString Code Page 304 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 318 IPR2021-00762...
  • Page 319 Remote Fan Over Speed Fault; masking is disabled by default; if enabled, the trap will not be raised FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 305 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 320 Identifies the Longitude of DisplayString Remote fwuGeoRmtName Identifies the Latitude of DisplayString Remote Page 306 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 320 IPR2021-00762...
  • Page 321 Provides a way to reset the INTEGER Remote SeRF card. Set to 1 to trigger a Remote reset FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 307 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.

  • Page 322: Traps

    Host DART Card Over Drive fault. RF signal received from BTS is too high Page 308 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 322...
  • Page 323 Indicate the hardware mismatch for the RF DART card between Host and Remotes fwuRmtRangingFault Host cannot auto-range a connected Remote anymore FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 309 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 324 AC Power monitor 3 Fault fwuHstSysCardPrimaryCPFault Primary Clock Priority Fault fwuHstSysCardSecondaryCPFault Secondary Clock Priority Fault Page 310 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 324 IPR2021-00762...
  • Page 325 PPENDICES FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 311 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 325 IPR2021-00762...
  • Page 326 Intentionally Blank Page Page 312 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 326 IPR2021-00762...
  • Page 327 This section provides the Host maintenance procedures. Refer to this section when scheduled maintenance is required. Recommendation: : The replacement interval for the Host fan is 60 months. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 313 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.
  • Page 328 7 7 Notify the NOC or alarm monitoring system operator that the fans are back in operation. 22396-A THUMB SCREWS ASSEMBLY Page 314 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 328 IPR2021-00762...

  • Page 329: Power Supply Replacement Procedure

    8 8 Verify that the power switch is in its OFF position, and then plug power plug into the power connector on the front of the Power Supply. Make certain that it is fully seated. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 315 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 330 10 0 Notify the NOC or alarm monitoring system operator that the system is back in operation. Page 316 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 330...

  • Page 331: System Card Replacement Procedure

    4 4 Loosen the two thumb screws that secure the System Card to the front of the Host enclosure. 22398-A FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 317 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 332 10 0 Notify the NOC or alarm monitoring system operator that the system is back in operation. Page 318 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 332...

  • Page 333: Serf Card Replacement Procedure

    Optical Port 1 name Optical Port 2 name Optical Port 3 name Optical Port 4 name FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 319 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 333...
  • Page 334 DART Forward Gain DART Reverse Gain Configuration and Alarm Details DART Name of DART 6 Page 320 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 334 IPR2021-00762...
  • Page 335 Remote Dart SFP Id DART Forward Gain DART Forward Delay DART Reverse Delay LPA Operating Mode FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 321 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 335...

  • Page 336: Remove The Serf Card

    22397-A 5 5 Use the two handles to carefully withdraw the SeRF Card from the enclosure. Page 322 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 336...

  • Page 337: Swap Compact Flash From Old Serf Card To New Serf Card

    Install the Compact Flash card label side up, and with the connectors pointing toward the middle of the SeRF card. Gently push the Compact Flash card in until it is firmly seated. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 323 ADCP-77-073 • Issue 2 • 11/2009 ©...

  • Page 338: Install New Serf Card

    14 4 Notify the NOC or alarm monitoring system operator that the system is back in operation. Page 324 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 338...

  • Page 339: Dart Card Replacement/Installation Procedure

    2 2 Determine slot location of the new DART card. See Figure 1-6 on Page 14 for DART card slot assignments. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 325 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 340 Divider Bar with 2 Philips-Head Screws Blank Panel with 2 Retaining Screws 77073-079 Page 326 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 340 IPR2021-00762...
  • Page 341 14 4 Notify the NOC or alarm monitoring system operator that the DART card is ready for operation. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 327 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
  • Page 342 Intentionally Blank Page Page 328 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 342 IPR2021-00762...

  • Page 343: Warranty/Software

    EPAIR XCHANGE OLICY All repairs of ADC Products must be done by ADC or an authorized representative. Any attempt to repair or modify ADC Products without written authorization from ADC voids the warranty. If a malfunction cannot be resolved by the normal troubleshooting procedures, call the Technical Assistance Center at 1-800-366-3891, extension 73476 (in U.S.A.

  • Page 344: Repair Charges

    Upon receipt of the defective Product, ADC will credit Buyer with 20 percent of full price charged for any Product to be Out-of-Warranty. Products must be returned within thirty (30) days to be eligible for any advance replacement credit.
  • Page 345 Delay RF propagation delay, which can be set for a linked Host DART and Remote DART using an EMS window or command. FlexWave Prism Element Management System, the software application documented in this document. ENET Port Ethernet port capable of CAT5 transmission.
  • Page 346 The EMS uses HTTP to allow access to a Host or Remote through its IP address. Host Unit FlexWave Prism network element that receives an RF signal from the BTS and converts it to an optical signal to its paired Remotes. Linear Power Amplifier(LPA) An electronic module in the Remote.
  • Page 347 Value that defines when a reported state in the Host/Remote pair is considered to be in alarm. Universal Radio Head. This name derives from the ability of a FlexWave URH Remote to support multiple bands of different types. FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 333 ADCP-77-073 • Issue 2 • 11/2009 ©...
  • Page 348 Intentionally Blank Page Page 334 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 348 IPR2021-00762...
  • Page 349 ADCP Number: Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits and ADC further disclaims any and all liability for indirect, incidental, special, consequential or other similar damages.
  • Page 350 Intentionally Blank Page Page 336 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 350 IPR2021-00762...
  • Page 351 – options ......... 20 Major, DARTs – ........253 ..........24 versus timeslots .........19 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 337 ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc. CORNING EX1005, page 351 IPR2021-00762...
  • Page 352 ......166 – Configuring Host DARTs ....152 DART Forward Gain list ......165 Page 338 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 352 IPR2021-00762...
  • Page 353 ......326 Function Explorer Tree ......138 Duplexer, remote ........40 Fwd Launch column FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 339 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 353 IPR2021-00762...
  • Page 354 Host Name, creating .......147 – System Alarm connections ..81 – WDM components ....90 Page 340 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 354 IPR2021-00762...
  • Page 355 ........... 181 MATEMon SwVER column, System Inventory LNA alarm table ..........251 ........... 181 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 341 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 355 IPR2021-00762...
  • Page 356 Network Manager, assign role of Remote .... 200 ..........249 Network Port status Optics Number column Page 342 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 356 IPR2021-00762...
  • Page 357 – Host ..........83 Red LED ..........141 Power Det alarm ........251 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 343 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 357 IPR2021-00762...
  • Page 358 – decommissioning ....232 – linking to Host RF Power Fault ....162 ........253 Page 344 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 358 IPR2021-00762...
  • Page 359 System Nominal Optical .....58 SERF Fault alarm Standby mode ......153 Host ..........222 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 345 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 359 IPR2021-00762...
  • Page 360 Trap Table, SNMP interface set Master Clock Priority Level ....291 ..150 Page 346 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 360 IPR2021-00762...
  • Page 361 ....90 White LED ..........141 Windows 2000 ........142 Windows XP ........... 142 FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 347 ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc. CORNING EX1005, page 361 IPR2021-00762...
  • Page 362 Page 348 FlexWave Prism Host, Remote and EMS 5.1 System Reference © 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009 CORNING EX1005, page 362 IPR2021-00762...
  • Page 363 CORNING EX1005, page 363 IPR2021-00762...
  • Page 364 Website: www.adc.com CORNING EX1005, page 364 IPR2021-00762...

Table of Contents