1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
DLP-747
Page 2 of 5
C. CES INTERFACE CONFIGURATION
13. Double click on one of the ports available (1 to 16). The CES interface screen appears.
Refer to the example shown in Figure 747-2.
14. Set the CES configuration options as needed using Table 747-3 as a reference.
15. Select the Apply button and then the Close button to return to the E1 card display.
16. Repeat steps 3 through 6 for each E1 Multi 1 port on the card.
17. Select the Close button to return to the Chassis View window.
18. Repeat steps 1 through 17 for each card in the shelf.
Stop! You have completed this procedure.
NE Name: Cellworx1
NE Id: 1
NE AND CARD TYPE/
Card: E1 MULTI 1
SLOT INFORMATION.
Slot Number: 8
Port Number: 1
CARD REPRESENTATION
WITH ALARM
INDICATIONS.
CLICK ON THE PORT TO
CONFIGURE INDIVIDUAL
E1 PORTS.
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
Page 2-222
© 2000, ADC Telecommunications, Inc.
Cellworx Vision: Card View - E1 Circuit Emulation Service
Status:
Configuration:
Card Level
Administrative State:
Locked
E1 MULTI
Unlocked
1
Ring Selection:
Port Level
Administrative State:
Locked
Unlocked
Service Type:
ADC
Circuit Emulation (CES)
Status
Cell relay (CRS)
Active
APS
Line Build Out (LBO):
Line Coding:
Port
Line Type:
1
1
9
2
2
10
3
3
11
Facility Data Link (FDL):
4
4
12
5
5
13
Loopback Config:
6
6
14
7
7
15
Circuit Identifier:
8
8
16
Apply
Chassis View
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
Figure 747-1. E1 Multi 1 Card Configuration Window
X
Congestion Thresholds:
Ingress:
80
%
Egress:
%
80
Transmit Timing Source:
Recieved
Local
120 Ohms
HDB3
E1 CRC-4 MF
None
None
default
Refresh
Close
REPAINTS WINDOW
CLOSES CARD LEVEL
TO REFLECT ANY
VIEW AND RETURNS TO
CHANGES.
SHELF LEVEL VIEW.
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CARD LEVEL
CONFIGURATION OPTIONS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
E1 PORT LEVEL
CONFIGURATION OPTIONS.
SELECT PORT FIRST.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
0026-049
Need help?
Do you have a question about the Release 3.1 and is the answer not in the manual?
Questions and answers