ADC Release 3.1 User Manual page 439

Table 793-1. Display T3 CES Card Status Definitions, continued
ITEM STATUS
DS3 Line Status No Alarm
Xmit AIS
LOS
Loopback
State
Other Failure
1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
DEFINITION
T3 line is operating within
normal parameters.
Card is transmitting an AIS
signal.
No input signal being
received.
Card has been manually set to
loop signal back to customer
equipment.
Card is experiencing a failure
other than these listed.
Page 3 of 3
ACTION
No action required.
Check local T3 signal input.
Check metallic input and DSX.
Check customer end for
troubleshooting activity. If required,
release loopback per DLP-772.
© 2000, ADC Telecommunications, Inc.
DLP-793
Page 2-419