ADC Release 3.1 User Manual page 441

9. To configure the thresholds, place the cursor in the individual count boxes and type in the
new threshold value. Refer to Table 794-1 for valid values. Once all counts are entered in
each box, select the Apply button at the bottom of the screen to send the new data to the
database.
10. Select the Close button to dismiss the open windows.
Stop! You have completed this procedure.
Cellworx Vision: Performance Monitoring Selection Criteria
Resource: Slot / Card Type
NE 1: Cellworx1
Slot 4 / T1 MULTI 1
NE 2: Cellworx2
Slot 5 / RADSL-A CRS
NE 3: Cellworx3
Slot 6 / T3 TMUX MULTI
NE 4: CellworxEXP Slot 7 / T3 CRS
Slot 10 / T3 CES
Slot 12 / 155 MM CRS
Slot 16 / 622 Ring
Slot 17 / 622 Ring
Apply
DISPLAYS
SELECTED
DISPLAYS CARD SLOT AND
TYPE SELECTED. PORT.
Cellworx Vision: Performance Monitoring Data NE 2
AAL-1
Card Type Slot-Port
T3 CES 8-1
Refresh
REFRESHES
SELECTED
LINE.
Figure 794-2. Performance Monitoring Data T3 CES Port Window
1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
Port
Slot 10 / Port 1
Slot 10 / Port 2
Slot 10 / Port 3
Save
Figure 794-1.T3 CES PM Selection Criteria Window
SUSPECTED
INTERVAL RESET REMAINING COLUMNS DISPLAY ERROR COUNTS FOR
SELECTED. COUNTS EACH ERROR TYPE.
Interval Suspect SEs
current
0 0
Refresh All Reset Selected
REFRESHES RESETS COUNT
EVERY LINE OF SELECTED
ITEM. LINE ITEMS.
Layer
AAL-1
Close
LCs BUs BOs SCIs
0 0 0
0
Claear Selected Configure Thresholds
RESETS COUNT BRINGS UP
OF ALL LINE CONFIGURATION
ITEMS. WINDOW FOR
CARD.
© 2000, ADC Telecommunications, Inc.
DLP-794
Page 2 of 3
X
Interval
current
00:00 - 00:15
00:15 - 00:30
00:30 - 00:45
00:45 - 01:00
01:00 - 01:15
01:15 - 01:30
01:30 - 01:45
01:45 - 02:00
02:00 - 02:15
0026-006
X
DCs
0
Close
CLOSES WINDOW.
0026-022
Page 2-421