Set Craft Menu Configuration - ADC Release 3.1 User Manual

1152700 Issue 1 February 2001 Section 2 Operations and Maintenance
DLP-769
Page 1 of 2
Summary: This procedure describes the steps involved to assign the minimal craft user levels
required to access each craft menu. The craft "display" screens should be made available to all
users (Level 1 and above). Any screens that allow configuration changes to cards, ports, or
features, should be at least a Level 2. Level 2 users will not have access to the user accounts. The
administrator Level 3 user will have access to all menus including user accounts. It is assumed
that the user has gained access to the system and launched the Cellworx Vision GUI prior to this
procedure. This feature has been disabled for release 2.0 systems.
1. From the GUI main display, select the node desired by double clicking on it using the left
mouse button
2. The shelf level "Chassis View" display appears as shown in Figure 769-1.
3. Select the Security pull down menu by clicking on it using the left mouse button.
4. Select the Craft Menu Configuration option by clicking on it using the left mouse button.
5. The Craft Menu Configuration window appears as shown in Figure 769-2. Select a menu
title on the left and then a User Level on the right. Any display screens should be set at a
level 1 so all users can retrieve this information. Configuration screens should be set to
level 2 so all level 2 users can configure the cards in a shelf. System administration screens
should be set to level 3 so the level three administrator can do level one and two tasks as
well as assign new users.
6. After changing the privilege levels on the craft screens, select the Apply button to send the
information to the system database followed by the Close button to return to the shelf level
GUI screen.
Stop! You have completed this procedure.
SELECT THE SECURITY
PULLDOWN MENU USING
LEFT MOUSE BUTTON OR
BY PRESSING THE ALT+A
KEYS SIMULTANEOUSLY.
Page 2-298
© 2000, ADC Telecommunications, Inc.

SET CRAFT MENU CONFIGURATION

Cellworx Vision: Chassis View,
File Configuration Fault
S N T
C M 3
I T
C M
U
X
Figure 769-1. Cellworx Vision Chassis Level Display
Network Element 2
Security
Craft User Configuration
Craft Menu Configuration
T T T T E E
M 1 3 3 1 1
U M
X u C C M M
l R R u u
E t S S l l
X i t t
X
6 6 S
2 2 C
2 2
R R
i i
n n
13475-B