Retrieve T1 Multi 1 Card Status - ADC Release 3.1 User Manual

1152700 Issue 1 February 2001 Section 2 Operations and Maintenance
DLP-764
Page 1 of 3
Summary: This procedure defines the information retrieved from the shelf level GUI display for
the T1 Multi 1 CRS card status. User must have the GUI launched and accessed the shelf level
GUI display per NTP-007 prior to performing this procedure.
1. Double click on the T1 Multi 1 CRS card located in the shelf level GUI "Chassis View" at
the top of the window.
2. The T1 Multi 1 CRS card display appears as shown in Figure 764-1. Click the small block
between the Status and Configuration sections and drag it downward to view all the status
information. Refer to Table 764-1 for definitions of status information provided.
3. Select each port on the card to view the port status.
4. Select Close button to return to the chassis level view.
Stop! You have completed this procedure.
Cellworx Vision: Card View - T1 Cell Emulation Service
NE Name: Cellworx1
NE Id: 1
Card: T1 MULTI 1
Slot Number: 8
Port Number: 1
T1 MULTI
1
ADC
Status
Active
APS
Port
1 1 9
2 2 10
3 3
11
4 4 12
5 5
13
6 6 14
7 7 15
8 8 16
Apply
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
Page 2-284
© 2000, ADC Telecommunications, Inc.

RETRIEVE T1 MULTI 1 CARD STATUS

Status:
Card Level
Up
Operational State:
Availabli
Availability State:
Protection State: Not Protected
Port Level
Line State:
Transmit:
Receive:
Xmt AIS
No Alarm
XMT Far End LOF
RCV AIS
RCV Far End LOF
RCV Test Code
Other:
LOF
LOS
Loopback State
Other Failure
TC Alarm Status: LCD Alarm
Configuration:
Port Level
Chassis View Refresh
RETURNS TO CHASSIS REPAINTS WINDOW
VIEW WITHOUT CLOSING TO REFLECT ANY
CARD LEVEL VIEW. CHANGES.
Figure 764-1. T1 Multi 1 Card Status Window
X
CLICK ON BOX AND DRAG
UP OR DOWN TO EXPAND
STATUS OR CONFIGURATION
VIEWS.
Close
CLOSES CARD LEVEL
VIEW AND RETURNS TO
13449-B
SHELF LEVEL VIEW.