ADC Release 3.1 User Manual page 382

1152700 Issue 1 February 2001 Operation and Maintenance
DLP-785
Page 6 of 7
Table 785-2. FT1 FRS Configuration Options, Continued
SELECTION DEFAULT
Loopback None
Far End Loopback None
DISPLAYS NE AND
CARD TYPE/SLOT
INFORMATION.
DOUBLE-CLICK ON
A PORT TO CHANGE
TO THAT PORT FOR
INTERFACE CONFIG-
URATION.
SELECT THE FIRST
CHANNEL AND/OR THE
LAST CONTIGUOUS
CHANNEL TO CREATE
AN INTERFACE.
Page 2-362
© 2000, ADC Telecommunications, Inc.
OPTIONS
None
Facility Line
Terminal
Facility
Payload
None
Line
Payload
Reset
Cellworx Vision: Frame Relay Interface
Node Name: NE-2
Node ID: 4
Location: Broadway
Double click on an interface to display it.
Select a channel number with the left mouse button to start channel selection.
Select a channel number with the right mouse button to end channel selection.
Select a port to switch ports.
Interface Name:
Port Channel
1 X
Interface Contact:
2 X
3 X Interface Location:
4 X
Recording Interface Id:
Operational Status:
Interface selection enabled
Provisioned Endpoints:
Interface creation allowed
DLCI Length:
1 2 3 4 5 6 7 8 9
Used Bandwidth:
1 2
Ingress:
Current
Effective Bandwidth:
Interface Type:
Signaling Parameters
Signaling Protocol:
None
Apply Delete
DELETES THE INTERFACE
SHOWN AS "CURRENT"
ABOVE.
Figure 785-4. FT1 FRS Interface Configuration Window
DEFINITIONS
No Loopback selected.
Loops frames back out to EIM after assigning
overhead and buffering.
Loops ATM cells back to Cellbus.
Loops the payload back to customer interfacing
equipment before assigning overhead and buffering.
No loopback is requested.
Tells the far end to loop the line back.
Tells the far end to loop the payload after line data is
extracted.
Tells the far end to stop the loopback.
Slot Number: 6
Card: FT1 FRS
Port Number: 4
DS0-E0 FRS : Slot 04 : Port 01 : Channels 01-24
default
default
0000000000000000
Up
0
2 Octets 10 Bits
% Egress:
0.00
100.00
%
IWF Type:
UNI NNI FRF.5 FRF.8
LMI Rev1 Annex D: ANSI T1.617D
Card View Refresh
RETURNS TO THE REFRESHES
CARD VIEW. SCREEN
DATA.
X
%
0.00
Annex A: CCITT Q
Close
CLOSES THE WINDOW
AND RETURNS TO THE
CARD VIEW WINDOW.
0026-012