ADC Release 3.1 User Manual page 225

Cellworx Vision: Remove Ring NE - Task Overview
1) Checking for exisiting connections
2) Physically remove transmit fiber from left RIC
3) Physically remove receive fiber from left RIC
4) Connect network elements left RICs
5) Physically remove transmit fiber from right RIC
6) Physically remove receive fiber from right RIC
7) Connect new network element to right RICs
8) Discovering network configuration
9) NE removed updating topology
Figure 740-2. Cellworx Vision Remove Ring NE Task Overview
Cellworx Vision: Remove Ring NE - Disconnect Fiber
Physically disconnect the transmit fiber from the
left Ring Interface Card on network element
Cancel
Figure 740-3. Cellworx Vision Remove Ring NE Fiber Instructional Window
Cellworx Vision : Remove Ring NE - Connect Fiber
Connect the physical fiber to the transmit port of
the left Ring Interface Card on network element
Network Element 1 (id 1)
and the receive port of the left Ring Interface Card
on the new network element.
Network Element 3 (id 3)
Cancel
Figure 740-4. Cellworx Vision Connect Ring NE Fibers Instructional Window
1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
Network Element 1 (id 1)
Next>>
Next>>
DLP-740
Page 3 of 5
X
11752-C
X
11920-B
X
11753-B
Page 2-205
2000, ADC Telecommunications, Inc.