ADC Release 3.1 User Manual page 169

DLP-727
Page 3 of 4
Table 727-1. T3 TMUX Multi 1 Performance Monitoring Values
MONTYPE MAX 15 MIN. THRESH
CV-L 16383
ES-L 900
CV-Pbit 16383
ES-Pbit 900
UAS 900
SEFS 900
CV-Cbit 16383
ES-Cbit 900
SES-Cbit 900
SES-Pbit 900
ES 900
SES 900
UAS 900
BES 900
SEFS 900
DM 15
1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
COMMENTS
Sets a count of Line Code Violations that the port can incur
before the system declares a TCA.
Sets a count of Line Errored Seconds that the port can
incur before the systems declares a TCA.
Sets a count of Parity bit Code Violation that the port can
incur before the systems declares a TCA.
Sets a count of Parity bit Errored Seconds that the port can
incur before the systems declares a TCA.
Sets a count of Unavailable Seconds that the port can incur
before the systems declares a TCA.
Sets a count of Severely Errored Frame Seconds that the
port can incur before the systems declares a TCA.
Sets a count of Cbit (Calculated parity bit of M-frame does
not match received parity bits) Code Violation that the port
can incur before the systems declares a TCA.
Sets a count of Cbit Errored Seconds that the port can incur
before the systems declares a TCA.
Sets a count of Cbit Severely Errored Seconds that the port
can incur before the systems declares a TCA.
Sets a count of Pbit Severely Errored Seconds that the port
can incur before the systems declares a TCA.
Sets a count of errored seconds that the port can incur
before creating a TCA on the system. Error seconds
determined as number of seconds FE>=1, SEF >=1, or any
Cellworx Vision/AIS condition.
Sets a count of line severely errored seconds that the port
can incur before creating a TCA on the system. SES is
determined as the number of seconds CV-L >=1547 or
LOS (Loss of Signal) >=1.
Sets a count of unavailable seconds that the port can incur
before creating a TCA on the system. UAS determined as
the number of seconds that the path is unavailable.
Sets a count of Burst Errored Seconds that the port can
incur before creating a TCA on the system.
Sets a count of severely errored frame seconds that the port
can incur before creating a TCA on the system. SEFS
determined when SEF >=1.
Sets a count of minutes that the port can incur a signal
degradation before creating a TCA on the system.
(continued)
Page 2-149
2000, ADC Telecommunications, Inc.