ADC Release 3.1 User Manual page 231

Release 3.1 gui
Table of Contents

Advertisement

4. Type the following command to create the first archive for the Performance data. Note you
should be in the /cellworx directory. You can determine this by typing "pwd". Also note
there is a date in the middle of the file name (050500). Change this date to reflect the date
the command is being run on.
tar –zcvf /tmp/perf_050500.tar.gz performance
5. Type the following command to create the first archive for the Alarm History data. Note
you should be in the /cellworx directory. You can determine this by typing "pwd". Also
note there is a date in the middle of the file name (050500). Change this date to reflect the
date the command is being run on.
tar –zcvf /tmp/alarm_050500.tar.gz alarmHistory
6. Type the following command to create the first archive for the Accounting data. Note you
should be in the /cellworx directory. You can determine this by typing "pwd". Also note
there is a date in the middle of the file name. Change this date to reflect the date the
command is being run on.
tar –zcvf /tmp/accounting_050500.tar.gz accounting
7. If you choose you can type the following commands to see the files that were created in
steps 4, 5, and 6.
ls –la /tmp/*.tar.gz
8. At this point the files /tmp/perf_050500.tar.gz, /tmp/alarm_050500.tar.gz, and
/tmp/accounting_050500.tar.gz have been created. Establish an FTP session with the
NMIC using the correct IP address for the desired network.
ftp <NMIC IP address>
9. A login prompt should appear requiring the user to enter the correct user name and
password e.g. userid=cellworx, password=cellworx#1. The account cellworx is by default
already on the NMIC but any user account except the root user account may be used.
10. Enter the following commands:
ftp> bin (to set transfer to binary mode)
ftp> prompt (this disables the system from prompting the user for
confirmation of every file encountered)
ftp> hash (turn on the hash marks for progress indication)
1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
DLP-742
Page 2 of 3
Page 2-211
2000, ADC Telecommunications, Inc.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Release 3.1 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Cellworx stn

Table of Contents

Save PDF