EMC Celerra Command Reference Manual page 83

Note: All times are in GMT. Block size is 8 KBytes.
Where:
Value
id
name
fs_state
type
replicator_state
source_policy
high_water_mark
time_out
current_delta_set
current_number_of_blocks number of modified blocks in the current delta set. One block size is 8 KB.
flow_control
total_savevol_space
savevol_space_available amount of free space in the SavVol.
Where:
Value
id
name
type
playback_state
high_water_mark
time_out
current_delta_set
flow_control
total_savevol_space
savevol_space_available amount of free space left in the SavVol.
outstanding delta sets delta sets on the destination SavVol that the replication service has not yet played back to the
The output for this command is divided into sections:
Source file system
Destination file system
Communication state between the Celerras
If you specify the verbose option when you run the command
For the Source File System Definition
ID of the source file system.
name of the source file system.
condition of the source file system and whether the source file system is active, mounted
read only, or unmounted (frozen).
replication or playback service.
if the replication service is active, inactive, or creating a delta set. If inactive, replication has
fallen out of synchronization.
how replication handles flow control situations. Values are:
ReadOnly = the file system is only available for reads.
Freeze = reads and writes are not allowed.
NoPolicy = no policy has been defined.
the size in MB of the file system changes accumulated since the last delta set was created.
When this size is reached, the replication service automatically creates a delta set on the
SavVol.
time interval (in seconds) at which the replication service creates a delta set.
current delta set being processed. This reflects the current delta set being tracked in
memory.
whether there is enough space in the SavVol to write a new delta set to the SavVol. An
active status indicates that there is not enough SavVol space to process the next delta set.
total size of the SavVol.
For the Destination File System Definition
ID of the destination file system.
name of the destination file system.
replication or playback service.
whether the playback service is active, inactive, or replaying a delta set. If inactive, replication
has not yet started.
size in MB of the delta sets at which the replication service automatically replays a delta set on
the SavVol.
time interval (in seconds) at which the replication service creates or replays a delta set.
next delta set to replay to the destination file system.
whether there is enough space to write an incoming delta set to the destination SavVol. An
active status indicates that there is not enough SavVol space to process the next delta set.
total amount of available SavVol space.
destination file system.
The fs Commands
83
fs_replicate