EMC Celerra Command Reference Manual page 235

server_4:
Where:
Value
session_id
alias
application_label
$ nas_replicate -list
server_2:
Local Source
Local Destination
session_id = fs25_T6_LUN1_000190100577_0047_fs23_T2_LUN1_000190100559_0047
application_label = RM/SE_WINSERVER1_L:\
session_id = fs25_T6_LUN0_000190100577_0047_fs23_T2_LUN0_000190100559_0047
application_label = RM/SE_WINSERVER1_K:\
session_id = fs25_T6_LUN2_000190100577_0047_fs23_T2_LUN2_000190100559_0047
application_label = RM/SE_WINSERVER1_G:\_ContainsRmDatabase
server_3:
server_4:
EXAMPLE #2
$ nas_replicate -info -all
server_2:
session_id = fs25_T6_LUN1_000190100577_0047_fs23_T2_LUN1_000190100559_0047
application_label = RM/SE_WINSERVER1_L:\
replication source:
src_target_name = iqn.1992-05.com.emc:dr-target
src_LUN_number = 1
name = fs25_T6_LUN1_000190100577_0047
replicator_state = WaitingForRequest
latest_snap_replicated = fs23_T2_LUN1_000190100559_0047.ckpt000
current_number_of_blocks = 0
transport_type = DP_REP_TRANSPORT_TYPE_RCP
replication destination:
dst_target_name = iqn.1992-05.com.emc:0001901005590047-2
dst_LUN_number = 1
name = fs23_T2_LUN1_000190100559_0047
playback_state = WaitingForRequest
outstanding snaps:
This command was run on the source Celerra Network Server.
Definition
globally unique character string used as the identifier of the iSCSi replication session.
alias name for the iSCSI replication session identifier.
name of the application using the iSCSI replication session.
This command was run on the destination Celerra Network Server.
To list all replication sessions and display the status of each session,
type:
The nas Commands
235
nas_replicate