EMC Celerra Command Reference Manual page 305

DESCRIPTION : Kerberos configuration
TESTS :
Check the machine password update is enabled and up-to-date.
COMPONENT : CIFS
DEPENDENCY : LocalGrp
DESCRIPTION : Local groups and local users
TESTS :
Check the local group database doesn't contain more than 80% of the maximum number
of servers,
Check if the servers in the local group database are all valid servers,
Check the state of the local group database (initialized and writable),
Check if the members of built-in local groups are all resolved in the domain,
Check the number of built-in local groups and built-in local users,
Check if the number of defined local users doesn't exceed 90% of the maximum
number.
COMPONENT : CIFS
DEPENDENCY : NIS
DESCRIPTION : Network Information System (NIS) configuration
TESTS :
If NIS is configured, check at least 2 NIS servers are defined (redundancy check),
Check if each NIS server can be contacted on the network,
Check if each NIS server really supports the NIS service.
COMPONENT : CIFS
DEPENDENCY : NTP
DESCRIPTION : Network Time Protocol (NTP) configuration
TESTS :
If NTP is configured, check at least 2 NTP servers are defined (redundancy check),
Check if each NIS server can be contacted on the network,
If computer names exist, check if NTP is configured and is running.
COMPONENT : CIFS
DEPENDENCY : Security
DESCRIPTION : Security settings
TESTS :
If the I18N mode is enabled, check the share/unix security setting is not in use,
Discourage to use the share/unix security setting,
Check the cifs.checkAcl parameter is enabled if the security setting is set to NT.
COMPONENT : CIFS
DEPENDENCY : Server
DESCRIPTION : Files servers
TESTS :
Check if each CIFS server is configured with a valid IP interface,
Check if each computer name has joined its domain,
Check if each computer name is correctly registered in their DNS servers,
Check if the DNS servers have the valid IP addresses of each computer name,
Check if a DNS domain exists if at least one computer name exists,
COMPONENT : CIFS
The server Commands
305
server_checkup