EMC Celerra Command Reference Manual page 205

# /nas/sbin/nas_mview -restore
Sync with CLARiiON backend ...... done
Validating mirror group configuration ...... done
Contacting source site source_cs, please wait... done
Running restore requires shutting down source site source_cs.
Do you wish to continue? [yes or no] yes
Shutting down remote site source_cs ....... done
Is source site source_cs ready for storage restoration ? [yes or no] yes
Sync with CLARiiON backend ...... done
STARTING an MV 'RESUME' operation.
Device group: mviewgroup ............ done
The MV 'RESUME' operation SUCCEEDED.
Percent synchronized: 100
Updating device group ... done
Is source site ready for network restoration ? [yes or no] yes
Restoring servers ...... done
Waiting for servers to reboot ...... done
Removing NBS access for server_2 .. done
Removing NBS access for server_3 .. done
Waiting for device group ready to failback .... done
Sync with CLARiiON backend ...... done
STARTING an MV 'FAILBACK' operation.
Device group: mviewgroup ............ done
The MV 'FAILBACK' operation SUCCEEDED.
Restoring remote site source_cs ...... failed
Error 5008: -1:Cannot restore source_cs. Please run restore on site source_cs.
# /nasmcd/sbin/nas_mview -restore
Stopping NAS services. Please wait...
Powering on servers ( please wait ) ...... done
Then on the Source Control Station, as the root user, type:
The nas Commands
205
nas_mview