EMC Celerra Command Reference Manual page 377

EXAMPLE #9
Where:
EXAMPLE #10
$ server_iscsi server_2 -lun -info 0 -target t1
server_2 :
Logical Unit 0 on target t1:
(Production) fsid=22 size=106496MB alloc=0MB dense
path=/ufs1/fs22_T1_LUN0_APM00043807043_0000/fs22_T1_LUN0_APM00043807043_0000
(extended)
replication=none
max_extension_size=84494MB
Where:
Value
fsid
size
alloc
dense
path
replication
max_extension_size
EXAMPLE #11
$ server_iscsi server_2 -lun -stat -all -target t1
server_2 :
Logical Unit 0 on target t1:
(Production) fsid=22 size=106496MB alloc=218MB dense
To display a list of all LUNs on a Data Mover, type:
$ server_iscsi server_2 -lun -list
server_2 :
target: t1
lun size(MB)
0 106496
1 10240
2 10240
Value Definition
alias for the iSCSI target's qualified name.
target
ID for the LUN.
lun
size of the LUN in MBs.
size (MB)
filesystem name of the file system containing the LUN.
To display information for LUN, 0, on target, t1, type:
Definition
ID of the file system containing the LUN.
reserved size of the LUN in MBs.
actual space allocated for the LUN.
storage method used by the LUN.
file system path to the LUN.
status of the LUN for iSCSI replication. Possible statuses are:
none—The LUN is not in a replication relationship.
source—The LUN is the source LUN in a replication relationship.
destination—The LUN is the destination LUN in a replication relationship.
available destination—The LUN is configured as a destination LUN (read-only) but not currently in a
replication relationship.
maximum amount of space by which the LUN can be extended.
To display statistical information for all LUNs on a target, t1, type:
The server Commands
filesystem
ufs1 ( id=22 )
ufs1 ( id=22 )
ufs1 ( id=22 )
377
server_iscsi