EMC Celerra Command Reference Manual page 65

volume = v168
pool =
rw_servers=
ro_servers=
rw_vdms =
ro_vdms =
backup_of = ufs1 Fri Apr 23 16:29:23 EDT 2004
stor_devs =
002804000190-0052,002804000190-0053,002804000190-0054,002804000190-0055
disks = rootd33,rootd34,rootd35,rootd36
RDF Information:
remote_symid
remote_sym_devname
ra_group_number
dev_rdf_type
dev_ra_status
dev_link_status
rdf_mode
rdf_pair_state
rdf_domino
adaptive_copy
adaptive_copy_skew
num_r1_invalid_tracks
num_r2_invalid_tracks
dev_rdf_state
remote_dev_rdf_state
rdf_status
link_domino
prevent_auto_link_recovery
link_config
suspend_state
consistency_state
adaptive_copy_wp_state
prevent_ra_online_upon_pwron = ENABLED
Where:
Value
id
name
acl
in_use
type
volume
pool
rw_servers
ro_servers
rw_vdms
ro_vdms
backup_of
stor_devs
disks
remote_symid
= 002804000218
=
= 2
= R1
= READY
= READY
= SYNCHRONOUS
= SYNCINPROG
= DISABLED
= DISABLED
= 65535
= 0
= 736440
= READY
= WRITE_DISABLED
= 0
= DISABLED
= DISABLED
=
= NA
= DISABLED
= NA
Definition
ID of a file system that is assigned automatically.
name assigned to a file system.
access control value for a file system.
whether a file system is registered into the mount table.
type of file system. See nas_fs for a description of the types.
volume on which a file system resides.
storage pool for the file system.
servers with read-write access to a file system.
servers with read-only access to a file system.
VDM servers with read-write access to a file system.
VDM servers with read-only access to a file system.
the remote RDF file system.
the storage system devices associated with a file system.
the disks on which the metavolume resides.
the serial number of the storage system containing the target volume.
The fs Commands
65
fs_rdf