EMC Celerra Command Reference Manual page 430

The server Commands
EXAMPLE #1
EXAMPLE #2
EXAMPLE #3
EXAMPLE #4
EXAMPLE #5
430
Celerra Network Server Command Reference Manual
To provide connectivity to the NIS lookup server for the specified
domain, type:
$ server_nis server_2 nasdocs 172.24.102.30
server_2 : done
To query NIS lookup servers using both a hostname and IP address,
type:
$ server_nis server_2 test40,172.24.102.36,test44
server_2 :
test40 = 172.24.102.30
test46 = 172.24.102.36
test44 = 172.24.102.34
To display the NIS configuration, type:
$ server_nis server_2
server_2 : yp domain=nasdocs server=172.24.102.30
To display the status of the NIS lookup servers, type:
$ server_nis server_2 -status
server_2 :
NIS default domain: nasdocs
NIS server 172.24.102.30
If NIS was not started, the output of this command will display as:
$ server_nis server_2 -status
server_2 :
NIS not started
To delete all of the NIS lookup servers for a Data Mover, type:
$ server_nis server_2 -delete
server_2 : done