EMC Celerra Command Reference Manual page 392

The server Commands
EXAMPLE #4
$ server_ldap server_2 -set -p -domain nasdocs.emc.com -servers 172.16.21.10
-binddn name
server_2 : Enter Password:*******
done
EXAMPLE #5
EXAMPLE #6
Value
LDAP domain
State
NIS domain
Proxy (Bind) DN
Profile Name
Profile TTL
Connected to LDAP
server address
EXAMPLE #7
EXAMPLE #8
$ server_ldap server_2 -lookup -user luser1
server_2 :
user: luser1, uid: 501, gid: 500, gecos: luser one, home dir: /home/luser1, shell:
/bin/bash
392
Celerra Network Server Command Reference Manual
To configure the use of simple authentication by specifying a bind
DN (Distinguished Name) and password, type:
To delete the LDAP configuration for the specified Data Mover and
stop the service, type:
$ server_ldap server_2 -clear
server_2 : done
To display informaton about the iPlanet configuration on a Data
Mover, type:
$ server_ldap server_2 -info
server_2 :
LDAP domain: nasdocs.emc.com
State: Configured - Connected
NIS domain: nasdocs
Proxy (Bind) DN: name
Profile Name: celerra_profile
Profile TTL: 60 seconds
Connected to LDAP server address: 172.16.21.10 - port 389
Where:
Definition
iPlanet domain name.
status of the iPlanet service.
NIS domain name.
DN (distinguished name) of the ID.
name of the client configuration profile.
how often the Celerra Network Server checks for configuration profile changes.
IP address and port number of the iPlanet server.
To start the iPlanet service, type:
$ server_ldap server_2 -service -start
server_2 : done
To provide information about a user, type: