EMC Celerra Command Reference Manual page 249

member_of =
standby
status
defined = enabled
See Example #4 for a description of command output.
EXAMPLE #12 To delete vdm_1, type:
$ nas_server -delete vdm_1
id
name
acl
type
server
rootfs
I18N mode = UNICODE
mountedfs =
member_of =
status
defined = enabled
Interfaces to services mapping:
See Example #6 for a description of command output.
EXAMPLE #13 To delete a physical Data Mover using root command, type:
$ /nas/sbin/rootnas_server -delete server_3
id
name
acl
type
slot
member_of =
standby
status
defined = disabled
See Example #6 for a description of command output.
= server_5, policy=auto
:
actual = online, ready
= 3
= vdm_1
= 0
= vdm
=
= root_fs_vdm_1
:
actual = permanently unloaded
= 2
= server_3
= 0
= nas
= 3
= server_5, policy=auto
:
actual = boot_level=0
The nas Commands
249
nas_server