Control Station; Accessing The Control Station; Accessing The Command Line Interface - EMC Celerra Command Reference Manual

Control Station

Accessing the
Control Station
Local
Remote
Accessing the
Command Line
Interface
Local
Remote
The Control Station provides utilities for managing, configuring, and
monitoring of the Data Movers in the Celerra Network Server.
As the system administrator, you may enter commands through the
control station to perform tasks that include the following:
Managing and Configuring of the database and Data Movers.
Monitoring statistics of the Celerra cabinet components.
You may use either local or remote access to the control station.
Local access of the command line interface is available directly at the
control station console.
Remote access (through rlogin or telnet) using the command line
interface lets you use the Celerra Network Server command set.
A description of how to gain local or remote access to the command
line interface for the Celerra Network Server follows.
For local access to the command line interface, at the prompt, log in
as nasadmin.
For remote access to the command line interface:
1. Enter rlogin or telnet followed by the IP address of the control
station.
2. Log in as nasadmin.
You are now logged in at the command line interface.
Overview
13
Control Station