EMC Celerra Command Reference Manual page 299

ufs1:
path
cid
type
source = 172.24.102.144:/srcdir
options= proto=TCP
path
cid
type
source = \\winserver1.nasdocs.emc.com\srcdir\
netbios= DM112-CGE0.NASDOCS.EMC.COM
admin
threads:
See Example #3 for a description of command outputs.
EXAMPLE #6 To stop data migration on server_2 for ufs1, type:
$ server_cdms server_2 -halt ufs1 -path /dstdir
server_2 : done
EXAMPLE #7 To check that all data has completed the migration, type:
$ server_cdms server_2 -verify ufs1 -path /dstdir
server_2 : done
EXAMPLE #8 To disconnect the path on server_2 for data migration, type:
$ server_cdms server_2 -disconnect ufs1 -path /nfsdir
server_2 : done
EXAMPLE #9 To disconnect all paths for data migration, type:
$ server_cdms server_2 -disconnect ufs1 -all
server_2 : done
EXAMPLE #10 To perform a verify check on ufs1 then convert it to a uxfs, type:
$ server_cdms server_2 -Convert ufs1
server_2 : done
= /nfsdir
= 0
= NFSV3
= /dstdir
= 1
= CIFS
= nasdocs.emc.com\administrator
path = /dstdir
state = ON_GOING
log = /
cid = NONE
The server Commands
299
server_cdms