Fs_Replicate - EMC Celerra Command Reference Manual

fs_replicate

SYNOPSIS
fs_replicate
-list
| -start <srcfs>[:if=<interface>|:ip=<ip_addr>]<dstfs>
[:cel=<cel_name>[:if=<interface>|:ip=<ip_addr>]]
[savsize=<MB>| -Sav <srcsavvol_name>[,<dstsavvol_name>]]
[-Cfg <srccfgvol_name>[,<dstcfgvol_name>]] [-option <options>]
| -abort { <srcfs>[,<dstfs>[:cel=<cel_name>]] | <dstfs> }
| -refresh <fs_name1>[,<fs_name2>[:cel=<cel_name>]][-option <options>]
| -modify <fs_name1>[,<fs_name2>[:cel=<cel_name>]] -option <options>
| -failover <srcfs>[:cel=<cel_name>] <dstfs> [-option <options>]
| -resync <dstfs>[:cel=<cel_name>[:if=<interface>|:ip=<ip_addr>]]
<srcfs>[:if=<interface>|:ip=<ip_addr>]
[savsize=<MB> | -Sav <srcsavvol_name>[,<dstsavvol_name>]]
[-Cfg <srccfgvol_name>[,<dstcfgvol_name>]] [-option <options>]
| -reverse <dstfs>[:cel=<cel_name>[:if=<interface>|:ip=<ip_addr>]]
<srcfs>[:if=<interface>|:ip=<ip_addr>] [-option <options>]
| -restart <srcfs>[:if=<interface>|:ip=<ip_addr>]
<dstfs>[:cel=<cel_name>[:if=<interface>|:ip=<ip_addr>]]
[savsize=<MB> | -Sav <srcsavvol_name>[,<dstsavvol_name>]]
[-Cfg <srccfgvol_name>[,<dstcfgvol_name>]] [-option <options>]
| -suspend <srcfs> <dstfs>[:cel=<cel_name>]
| -info { <fs_name> | id=<session_id> } [-verbose <number_of_lines>]
DESCRIPTION
OPTIONS
Manages local and remote replication.
fs_replicate starts, stops, refreshes and modifies replication
instances, and displays information for the source and destination file
systems.
fs_replicate fails over and reverses replication instances, and
resynchronizes a replication instance after it is has been halted.
Replication takes place locally unless a remote Celerra Network
Server name is specified.
-list
Lists all the replication instances. An inactive state for a file system
indicates that the replication or playback service is not running.
-start <srcfs>[:if=<interface>|:ip=<ip_addr>]
<dstfs>[:cel=<cel_name>[:if=<interface>|:ip=<ip_addr>]]
Starts replication on the source file system, <srcfs>, to the destination
file system, <dstfs>. The <interface> is the name of the interface used
for the transfer of delta sets. See server_ifconfig to obtain the interface
The fs Commands
71
fs_replicate