Table of Contents
Advertisement
The nas Commands
EXAMPLE #9
EXAMPLE #10
EXAMPLE #11
248
Celerra Network Server Command Reference Manual
mountedfs =
member_of =
status
:
defined = enabled
actual = mounted
Interfaces to services mapping:
See Example #6 for a description of command output.
To move the image of vdm_1 onto server_4, type:
$ nas_server -vdm vdm_1 -move server_4
id
= 3
name
= vdm_1
acl
= 0
type
= vdm
server
= server_4
rootfs
= root_fs_vdm_1
I18N mode = UNICODE
mountedfs =
member_of =
status
:
defined = enabled
actual = loaded, ready
Interfaces to services mapping:
See Example #6 for a description of command output.
To rename a Data Mover entry from server_2 to dm2, type:
$ nas_server -rename server_2 dm2
id
= 1
name
= dm2
acl
= 1000, owner=nasadmin, ID=201
type
= nas
slot
= 2
member_of =
standby
= server_5, policy=auto
status
:
defined = enabled
actual = online, active
See Example #4 for a description of command output.
To set up an access control level value of 1432 for server_2, type:
$ nas_server -acl 1432 server_2
id
= 1
name
= server_2
acl
= 1432
type
= nas
slot
= 2
- Quick Links:
- Server_Cifs
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Celerra and is the answer not in the manual?
Questions and answers