Server_Log - EMC Celerra Command Reference Manual

server_log

SYNOPSIS
server_log <movername>
[ -a ][ -f ][ -n ][ -s ]
DESCRIPTION
OPTIONS
EXAMPLE #1
$ server_log server_2 -f
NAS LOG for slot 2:
--------------------
1088091479: ADMIN: 4:
bufsz=256
1088091479: ADMIN: 4:
1088091479: ADMIN: 4:
1088091479: ADMIN: 4:
cs_ip=128.221.252.100:128.221.252.101:128.221.253.100:128.221.253.101
1088091479: ADMIN: 4:
1088091479: ADMIN: 4:
1088091479: ADMIN: 4:
1088091479: ADMIN: 4:
1088091483: ADMIN: 4:
1088091483: ADMIN: 4:
1088091483: KERNEL: 4:
Displays the log generated by the specified Data Mover.
server_log reads and displays the log generated by the Data Mover.
Information in the log file is read from oldest to newest. To view that
most recent log activity, add
No arguments
Displays the contents of the log added since the last reboot.
-a
Displays the complete log.
-f
Monitors the growth of the log by entering into an endless loop,
pausing, reading the log being generated. The output is updated
every second. To exit, type [ctrl] and [c] together.
-n
Displays the log without the time stamp.
-s
Displays the time in
log was executed.
To monitor the growth of the current log, type:
Command succeeded:
Command succeeded:
Command succeeded:
Command succeeded:
Command succeeded:
Command succeeded:
Command succeeded:
Command succeeded:
Command succeeded:
Command succeeded:
System Version-T5.3.9.2003
to the end of your command line.
|tail
format when each command in the
yyyy-mm-dd
logsys add output disk=root_log_2
logsys add output event bufsz=2048
uniqueid validate=LKE00033201518
param config
param kernel autoreboot=600
param NDMP md5=1
param PAX paxWriteBuff=64
param PAX nRestore=16
bufcache
device isa isa-0
The server Commands
393
server_log