EMC Celerra Command Reference Manual page 241

Note: The nas type is set automatically, vdm is set using nas_server, rdf
and standby are set up using server_standby.
[-all | -vdm]
The -all option displays the physical Data Mover and VDMs. The
-vdm option lists the VDMs only.
-delete <movername>
Deletes the specified physical Data Mover entry from the server table
or deletes the VDM configuration. A Data Mover that is being deleted
can not contain mounted file systems.
Deleting a physical Data Mover requires root command. Use
/nas/sbin/rootnas_server
-info {-all | <movername> |<slot_number>| id=<mover_id>}
Displays attributes for all physical Data Movers, or a Data Mover
specified by its <movername>, <slot_number>, or <mover_id>.
-info -vdm {-all | <vdm_name> | id=<vdm_id>}}
Displays attributes for all VDMs, or a specified VDM, including the
network interfaces that are being used by the CIFS servers.
-rename <old_movername> <new_movername>
Changes the name of the physical Data Mover or the VDM to the
specified name. See -create for rules applicable to naming a Data
Mover.
-acl <acl_value> <movername>
Sets an access control level value that defines an owner of the
physical Data Mover or the VDM, or the level of access allowed for
users and groups defined in the access control level table (see
nas_acl).
Note: root or owner privileges are required to create, modify, or delete access
control level entries.
[-name <name>] [-type vdm] -create <movername>
Creates a VDM with an optional name, for the specified physical or
VDM. The movername is case-sensitive supports the following
characters: a thru z, A thru Z, 0 thru 9, _(underscore), - (hyphen)
though names may not start with a hyphen. The default type is nas.
[-setstate <state>]
Sets the Data Mover to be loaded or mounted.
to execute a delete.
The nas Commands
241
nas_server