EMC Celerra Command Reference Manual page 146

The nas Commands
SEE ALSO
EXAMPLE #1
# /nas/sbin/nas_connecthome -modify -email_from admin@yourcompany.com
-email_server mail.yourcompany.com -email_server backup.mail.yourcompany.com
-email_priority 1 -ftp_ipport 172.24.102.20:22 -ftp_ipport_2 172.24.102.20:22
-ftp_priority 2
Ok
EXAMPLE #2
146
Celerra Network Server Command Reference Manual
[-site_id <site_id>]
Sets or modifies the side ID.
Note: Specifying "" (empty double quotes) does not disable the number
or restore its default value. The empty string is stored as is.
[-encryption_enabled { yes |no }]
Enables or disables the encryption of the CallHome payload
during transmission.
Note: Specifying "" (empty double quotes) reverts to the default value of
yes.
[-dial_in_enabled { yes |no }]
Enables or disables dial-in login sessions.
Note: Specifying "" (empty double quotes) reverts to the default value of
yes.
Configuring Celerra Events and Notifications
To configure and enable both Primary and Secondary destinations for
the Email and FTP Transport, type:
To display configuration information, type:
# /nas/sbin/nas_connecthome -info ConnectHome
Configuration:
Encryption Enabled
Dial In :
Enabled
Modem phone number
Site ID
Serial number
Email :
Priority
Sender Address
Recipient Address(es)
= yes
= yes
= 9123123123
= MY SITE
= APM00054703223
= 1
= admin@yourcompany.com
= emailalert@emc.com