The fs Commands
78
Celerra Network Server Command Reference Manual
dto=<destination timeout>
Plays back a delta set based on the time interval specified in
seconds (default=600).
hwm=<high_water_mark>
Specifies a threshold in megabytes (default=600) for generating or
playing back a delta set based on a storage space threshold. The
threshold is the amount of change allowed before triggering delta
set activity. If a value is specified using hwm= and both file
systems are specified in the command line, that value is applied
to both the source and destination file systems.
dhwm=<destination_high_water_mark>
Specifies a threshold in megabytes (default=600) for playing back
a delta set based on a storage space threshold. The threshold is
the amount of change allowed before triggering delta set activity.
qos=<qos>
Specifies the maximum network bandwidth in kilobits per second
that can be used for the replication session.
autofreeze={yes|no}
Automatically freezes reads and writes to the <srcfs> when the
SavVol becomes full during replication. File systems that are
frozen are not accessible to clients. The default is no.
autoro={yes|no}
Automatically mounts the <srcfs> read only when the SavVol
becomes full during replication. The default is no.
-restart <srcfs>[:if=<interface>|:ip=<ip_addr>]
<dstfs>[:cel=<cel_name>[:if=<interface>|:ip=<ip_addr>]]
The -restart option starts the replication session again. This option is
used after a suspend or when a replication session is out of
synchronization. If the restart is used after a suspend, the default
parameters are used. If the restart is used with an
out-of-synchronization replication, the settings in effect prior to the
restart are used and cannot be changed.
[savsize=<MB> | -Sav <srcsavvol_name>[,<dstsavvol_name>]]
[-Cfg <srccfgvol_name>[,<dstcfgvol_name>]]
[-option <options>]
See -start for a description of all the options.
-suspend <srcfs> <dstfs>[:cel=<cel_name>]
Leaves replication in a condition where it can be restarted, but stops
the playback and replication services from running.
Need help?
Do you have a question about the Celerra and is the answer not in the manual?
Questions and answers