EMC Celerra Command Reference Manual page 379

Where:
EXAMPLE #14
$ server_iscsi server_2 -mask -clear t1 -initiator
iqn.1991-05.com.microsoft:winserver1.nasdocs.emc.com
server_2 : done
EXAMPLE #15
$ server_iscsi server_2 -ns isns -set -server 172.24.102.66
server_2 : done
EXAMPLE #16
EXAMPLE #17
Where:
Value Definition
whether the iSNS service is started or stopped.
service
IP address of the iSNS server and port.
server
Value
target
initiator_name
grant LUNs
To clear the LUN mask for the initiator,
iqn.1991-05.com.microsoft:winserver1.nasdocs.emc.com, type:
To configure an iSNS client on the Data Mover for iSNS server with
IP address of 172.24.102.66, type:
Note: Before modifying the -ns server or port, iSCSI service must be stopped,
then restarted once the changes are made. If the administrator fails to stop
the service, attempted modifications will have no effect until the service is
started even though the command reports "done".
To start the iSCSI service on the Data Mover, type:
$ server_iscsi server_2 -service -start
server_2 : done
To display the iSNS client service status, type:
$ server_iscsi server_2 -ns isns -info
server_2 :
iSNS Client Service Status
--------------------------
service : started
server : 172.24.102.66:3205[tcp]
state : SYNC
entity : isns:00000002
source : iqn.1992-05.com.emc:apm000438070430000-1
ESI support : TRUE
ESI port : 52427
ESI Time : 1131484090 (Tue Nov
timeout : 3000
trace : FALSE
PG support : TRUE
Definition
alias name of the target.
qualified name of the iSCSI initiator on the host.
number of the LUNs to which the initiator is granted access.
8 21:08:10 2005)
The server Commands
379
server_iscsi