nass01 is not doing backup
nass02 is not doing backup
nass03 is not doing backup
----
NASA STATS ----
**
nasa thid 0 (non-DAR RESTORE) **
The first five entries of restore name list are:
original name: /filt, destination name
/ufsvbbr/r_filter_pax
Total bytes processed: 172326912
Total
file
throughput: 7 MB/sec
average file size: 4006KB
Total nasa wait nass count: 0
Total nasa wait nass time: 0 msec
Total time since last reset: 21 sec
Tape device name: c0t0l1
dir
or
0
size file processed: 17
1 -- 8KB
size file processed: 6
8KB+1 -- 16KB size file processed: 18
16KB+1 -- 32KB size file processed: 0
32KB+1 -- 64KB size file processed: 0
64KB+1 -- 1MB
size file processed: 1
1MB+1 -- 32MB size file processed: 0
32MB+1 -- 1GB
size file processed: 0
1G more
size file processed: 0
nasa01 is not doing backup/restore
nasa02 is not doing backup/restore
nasa03 is not doing backup/restore
----
NASW STATS ----
nasw00 RESTORE (in progress)
Session Total Time: 00:00:21 (h:min:sec)
Session Idle
Time: 00:00:00 (h:min:sec)
KB Tranferred: 168384
Average Transfer
Average Burst Transfer: 7 MB/Sec
__Point-in-Time__ (over the last 10 seconds):
Rate=6 MB/Sec
Burst=7 MB/Sec
Get Pool: 61 buffers
nasw01 No session found
nasw02 No session found
nasw03 No session found
processed: 42
Block Size: 32768 (32 KB)
Rate: 7 MB/Sec
27 GB/Hour
27 GB/Hour
Idle=0 msec/sec
Put Pool: 0 buffers
The server Commands
441
server_pax
Need help?
Do you have a question about the Celerra and is the answer not in the manual?
Questions and answers