EMC Celerra Command Reference Manual page 355

FOR CIFS OPERATIONS
access=<-client>[:<-client>]...
Excludes the specified NFS client(s) from access even if they are
part of a subnet or netgroup that is allowed access. Clients must
be preceded with - (dash) to specify exclusion.
nfsv4only
Specifies that the NFS export can be accessed only when a client is
using NFSv4.
vlan=<vlanid>[,<vlanid>,... ]
Specifies that all hosts belonging to the VLAN ID will have access
to the exported file system. Hosts on other VLANs will be denied.
Note: Clients can be a hostname, netgroup, subnet, or IP address and
must be colon-separated, without spaces. A subnet is an IP
address/netmask (for example, 168.159.50.0/255.255.255.0). A hostname
is first checked for in the Data Mover's local hosts database, then on the
NIS (host database) or DNS server (if enabled). A netgroup is searched in
the local netgroup database and then on the NIS server's netgroup
database. If the client name does not exist in any case, then access is
denied.
Note: Netgroups are supported. The hosts and netgroup files can be
created on the Control Station using your preferred method (for
example, with an editor, or by copying from another node), then copied
to the Data Mover using the
-unexport [-perm] <pathname>
Temporarily unexports a <pathname> unless -perm is specified. If
-perm is specified, removes the entry from the export table.
-list -name <sharename>
Displays the specified CIFS share.
[-option <options>]
Specifies the following comma-separated list of option(s):
[netbios=<netbios_name>]
When the share has an associated NetBIOS name, that name is
required to locate the entry. Multiple CIFS entries can have same
<sharename> when belonging to a different NetBIOS name.
-name <sharename> [-ignore] [ -option <options> ]
[-comment <comment>] <pathname>
Creates a CIFS share. The -ignore option overwrites the previous
options and comment in the export table. The <sharename> is case
server_file command.
The server Commands
355
server_export