EMC Celerra Command Reference Manual page 383

Redirect
Authorize
Authenticate
Negotiate
Other
Logout Normal
Logout Other
Last Failure Type
Last Failure Time
Last Failure Initiator initiator ID from which failed login came.
Last Failure IP
EXAMPLE #22
EXAMPLE #23
EXAMPLE #24
EXAMPLE #25
number of logins that are redirected.
number of logins that failed due to authorization failure.
number of login failures due to failed authentication.
number of login failures due to errors in iSCSI parameter negotiation.
number of login failures due to other causes.
number of logouts requesting session closing.
number of other logouts.
type of last login failure.
time of last login failure.
IP from which failed login request came.
To stop iSCSI service, type:
$ server_iscsi server_2 -service -stop
server_2 : done
To delete an iSCSI LUN 1 on the target, t1, type:
$ server_iscsi server_2 -lun -delete 1 -target t1
server_2 : done
To clear iSNS client service configuration, type:
$ server_iscsi server_2 -ns isns -clear -server
server_2 : done
When a -clear is issued, the system returns the message "done",
however, settings are not cleared until iSNS service is restarted.
To delete the target, t1, type:
$ server_iscsi server_2 -target -delete t1
server_2 : done
The server Commands
383
server_iscsi