EMC Celerra Command Reference Manual page 79

SEE ALSO
BACKEND OUTPUT
EXAMPLE #1
$ fs_replicate -start src_ufs1 dst_ufs1:cel=cs110
operation in progress (not interruptible)...id
name = src_ufs1
acl = 0
in_use = True
type = uxfs
worm = off
volume = v156
pool = clar_r5_performance
member_of = root_avm_fs_group_3
rw_servers= server_2
ro_servers=
rw_vdms =
ro_vdms =
ckpts = src_ufs1_ckpt1
ip_copies = dst_ufs1:cs110
stor_devs = APM00042000818-0014,APM00042000818-001B,APM00042000818-0018,APM00042
000818-0017
disks = d21,d12,d19,d10
disk=d21 stor_dev=APM00042000818-0014 addr=c16t0l15
disk=d21 stor_dev=APM00042000818-0014 addr=c48t0l15
disk=d21 stor_dev=APM00042000818-0014 addr=c0t0l15
disk=d21 stor_dev=APM00042000818-0014 addr=c32t0l15
disk=d12 stor_dev=APM00042000818-001B addr=c0t1l0
disk=d12 stor_dev=APM00042000818-001B addr=c32t1l0
disk=d12 stor_dev=APM00042000818-001B addr=c16t1l0
disk=d12 stor_dev=APM00042000818-001B addr=c48t1l0
disk=d19 stor_dev=APM00042000818-0018 addr=c16t0l11
disk=d19 stor_dev=APM00042000818-0018 addr=c48t0l11
-info { <fs_name>[id=<session_id>]
Displays the status of the replication instance for the file system on
the specified Celerra Network Server or the file system group.
[ -verbose <number_of_lines> ]
Displays historical information about the file system replication
in the number of lines specified. The maximum value is 128 lines.
Using Celerra Replicator and Replicating Celerra CIFS Environments,
fs_copy, nas_fs, server_ifconfig.
The number associated with the storage device is dependent on the
attached backend of the system. CLARiiON backends display a
prefix of APM before a set of integers, for example,
APM00033900124-0019. For example, Symmetrix storage backends
display as 002804000190-003C. The outputs displayed in the
examples are from a CLARiiON backend.
To start a replication relationship between a source and destination
file system, type:
The fs Commands
= 58
server=server_2
server=server_2
server=server_2
server=server_2
server=server_2
server=server_2
server=server_2
server=server_2
server=server_2
server=server_2
fs_replicate
79