EMC Celerra Command Reference Manual page 381

EXAMPLE #19
Where:
Value
Target Alias Name
Target iSCSI Name
Login Accepts
Login Failed
Redirect
Authorize
Authenticate
Negotiate
Other
Logout Normal
Logout Other
Initiator
TSIH
ISID
Command PDUs
Read Command PDUs
To display statistics for the target, t1, and the current sessions on the
target, type:
$ server_iscsi server_2 -target -stat t1
server_2 :
Target Alias Name: t1
Target iSCSI Name:
iqn.1992-05.com.emc:apm000438070430000-1
[Login/Logout Stats]
Login Accepted: 1
Login Failed: 0
Redirect: 0
Authorize: 0
Authenticate: 0
Negotiate: 0
Other: 0
Logout Normal: 0
Logout Other: 0
Last Login Failed: N/A
[Session Stats]
Initiator:
iqn.1991-05.com.microsoft:winserver1.nasdocs.emc.com
TSIH: 1 ISID: 400001370000
Command PDUs: 5886
Read Command PDUs: 3604
Write Command PDUs: 2256
Response PDUs: 5886
Data-In PDUs: 1936
Data-Out PDUs: 0
R2Ts: 0
Tx Data Octets: 132134422
Rx Data Octets: 132573696
Digest Errors: 0
Connection Timeout Errors: 0
Definition
alias for the iSCSI target's qualified name.
iSCSI qualified name of the target.
number of accepted login requests.
number of rejected login requests.
number of logins that are redirected.
number of logins that failed due to authorization failure.
number of login failures due to failed authentication.
number of login failures due to errors in iSCSI parameter negotiation.
number of login failures due to other causes.
number of logouts requesting session closing.
number of other logouts.
ID of initiator logged into target.
iSCSI session handle.
iSCSI session ID.
number of SCSI command protocol data units (PDUs) received by target.
number of read command PDUs received by target.
The server Commands
381
server_iscsi