EMC Celerra Command Reference Manual page 458

The server Commands
EXAMPLE #3
$ server_standby server_2 -restore mover
server_2 :
server_2 : going standby
server_2.faulted.server_3 : going active
replace in progress ...done
failover activity complete
commit
server_2 : renamed as server_3
server_2.faulted.server_3 : renamed as server_2
EXAMPLE #4
EXAMPLE #5
EXAMPLE #6
458
Celerra Network Server Command Reference Manual
server_3 : going active
replace in progress ...done
failover activity complete
commit in progress (not interruptible)...done
server_2 : renamed as server_2.faulted.server_3
server_3 : renamed as server_2
To restore server_3 as the standby Data Mover and
server_2.faulted.server_3 as the primary, type:
in progress (not interruptible)...done
To verify readiness of the standby Data Mover, type:
$ server_standby server_2 -verify mover
server_2 : ok
To delete the standby relationship for server_2, type:
$ server_standby server_2 -delete mover
server_2 : done
To create a standby relationship for three Data Movers, type:
$ server_standby server_2 -create mover=server_3
server_2 : server_3 is rebooting as standby
$ server_standby server_4 -create mover=server_3
server_4 : done
$ server_standby server_5 -create mover=server_3
server_5 : done
Note: Before any other actions can take place, the reboot must be complete.