EMC Celerra Command Reference Manual page 245

Where:
Value
id
acl
server
mountedfs file systems that are mounted on this VDM.
rootfs
name
EXAMPLE #3 To list the VDM server table, type:
$ nas_server -list -vdm
id
3
See Example #2 for a description of command output.
EXAMPLE #4 To list information for a Data Mover, type:
$ nas_server -info server_2
id
name
acl
type
slot
member_of =
standby
status
defined = enabled
actual = online, ready
Where:
Value
id
name
acl
type
slot
member_ofgroup to which the Data Mover is a member.
standby
status
EXAMPLE #5
To display detailed information for all servers, type:
$ nas_server -info -all
id
name
acl
type
slot
member_of =
standby
Definition
ID of the Data Mover.
access control value for the Data Mover or VDM.
server the VDM is loaded on.
ID number of the root file system.
name given to the Data Mover or VDM.
acl server mountedfs
0 1
= 1
= server_2
= 1000, owner=nasadmin, ID=201
= nas
= 2
= server_5, policy=auto
:
Definition
ID of the Data Mover.
name given to the Data Mover.
access control value for the Data Mover.
type assigned to Data Mover.
physical slot in the cabinet where the Data Mover resides.
if the Data Mover has a local standby associated with it.
whether the Data Mover is enabled or disabled, and whether it is active.
= 1
= server_2
= 1000, owner=nasadmin, ID=201
= nas
= 2
= server_5, policy=auto
The nas Commands
rootfs name
31 vdm_1
nas_server
245