EMC Celerra Command Reference Manual page 306

The server Commands
DEPENDENCY : Share
DESCRIPTION : Network shares
TESTS :
Check the available size and i-nodes on the root file system are at least 10% of
the total size,
Check the size of the share database doesn't exceed 30% of the total size of the
root file system,
Check if the pathname of each share is valid and is available,
Check if each server in the share database really exists,
Check if the I18N mode is enabled, all the share names are UTF-8 compatible,
Check the list of ACL of each share contains some ACE,
Check the length of each share name doesn't exceed 80 Unicode characters.
COMPONENT : CIFS
DEPENDENCY : SmbList
DESCRIPTION : 64k UID, TID and FID limits
TESTS :
In full mode, check the 3 SMB ID lists (UID, FID and TID) don't exceed 90% of the
maximum ID number.
COMPONENT : CIFS
DEPENDENCY : Threads
DESCRIPTION : Blocked threads and overload
TESTS :
Check CIFS threads blocked more than 5 and 30 seconds,
Check the maximum number of CIFS threads in use in the later 5 minutes doesn't
exceed 90% of the total number,
Check the number of threads reserved for Virus Checker doesn't exceed 20% of the
total number of CIFS threads.
COMPONENT : CIFS
DEPENDENCY : UM_Client
DESCRIPTION : Connectivity to the usermapper server
TESTS :
If usermapper servers are defined, check each server can be contacted,
Check if usermapper servers are defined, NIS is not simultaneously activated.
COMPONENT : CIFS
DEPENDENCY : UM_Server
DESCRIPTION : Primary usermapper server
TESTS :
If a primary usermapper is defined locally, check its database size doesn't exceed
30% of the total size,
Check if configuration file is in use, the filling rate of the ranges doesn't
exceed 90%,
Check if configuration file is in use, 2 ranges do not overlap,
Check if secmap is enabled,
In full mode, check the SID/UID and SID/GID mappings and reverses are correct and
coherent.
COMPONENT : CIFS
DEPENDENCY : UnsupOS
306
Celerra Network Server Command Reference Manual