EMC Celerra Command Reference Manual page 324

The server Commands
if=cge0 l=172.24.102.242 b=172.24.102.255 mac=0:60:16:4:35:4f
wins=172.24.102.25
Password change interval: 0 minutes
Value
Cifs threads started number of CIFS threads used when the CIFS service was started.
Security mode
Max protocol
I18N mode
Home Directory Shares whether Home Directory shares are enabled.
map
Usermapper auto
broadcast enabled
Usermapper
state
Default WINS servers address(es) of the default WINS server(s).
Enabled interfaces
Disabled interfaces
Unused Interface(s)
RC
SID
DC
ref
time
Alias(es)
if
Password change
interval:
EXAMPLE #6
EXAMPLE #7
$ server_cifs server_2
server_2 :
256 Cifs threads started
Security mode = NT
Max protocol = NT1
I18N mode = UNICODE
Home Directory Shares ENABLED, map=/.etc/homedir
Usermapper auto broadcast suspended
Usermapper[0] = [172.24.102.20] state:available
Default WINS servers = 172.24.103.25:172.24.102.25
324
Celerra Network Server Command Reference Manual
Where:
Definition
user authorization mechanism used by the Data Mover.
maximum dialect supported by the security mode.
I18N mode (unicode or ASCII).
home directory used by the Data Mover.
usermapper is using its broadcast mechanism to discover its servers. This only displays when the
mechanism is active. It is disabled when you manually set the Usermapper server addresses.
IP address of the server(s) running the Usermapper service.
current state of Usermapper.
Data Mover's enabled interface(s).
Data Mover's disabled interface(s).
interface(s) not currently used by the Data Mover.
reference count indicating the number of internal objects (such as client contexts) using the CIFS
server.
security ID of the domain.
Domain controller(s) used by the Data Mover. Depending on the number of DCs in the domain,
this list may be large.
number of internal objects using the Domain Controller.
Domain Controller response time.
alternate NetBIOS names assigned to the CIFS server configuration.
interface(s) used by the CIFS server.
the amount of time between password changes.
To configure the use of an external usermapper host with the IP
address 172.24.102.20, type:
$ server_cifs server_2 -add usrmapper=172.24.102.20
server_2 : done
To display the CIFS configuration for NT4 with external usermapper,
type: