Keysight Technologies 8163A User Manual page 400

error message
description
test value
action
error message
description
test value
action
8163A/B, 8164A/B, 8166A/B User's Guide
E10080: Laser <a> control for safety test failed
To test the current safety comparator the laser current needs to be set to two different
values
a laser number
Please return the unit to your local service center for repair
E10081: Safety comparator <a> test failed (b, c)
Checks whether laser current safety comparator includes at the right conditions a safety
interrupt at the CPU
a laser number
b shows whether the interrupt flag was raised when the current was lower than
the limit
c shows whether the interrupt flag was raised when the current was higher
than the limit
Please return the unit to your local service center for repair
Error Messages 14
399