8
Setting Attenuation and/or Power Levels
230
You cannot edit the
3
Press the [Table] softkey (or select the Menu item <Offset Table>)
•
For an 8164A/B mainframe, the first three
displayed.
•
For an 8163A/B mainframe, or an 8166A/B mainframe, the first
Offset Table entry is displayed.
If there are no entries, the message "Offset Table is Empty" is displayed.
λ
Figure 139
The
Offset Table
Figure 139shows the fourth, fifth and sixth entries in a
displayed on an 8164A/B mainframe.
•
To display the previous three entries, press the [Prev] softkey.
•
To display the next three entries, press the [Next] softkey.
4
Press the [Add] softkey.
•
Enter the wavelength
•
Select, then enter the corresponding Offset
5
Press [OK] to store the result in the
λ
Offset Table if the Offset (
λ.
λ
Offset Table.
8163A/B, 8164A/B, 8166A/B User's Guide
λ
) function is on.
λ
Offset Table entries are
λ
λ
Offset Table