Keysight Technologies 8163A User Manual page 332

CAUTION
CAUTION
8163A/B, 8164A/B, 8166A/B User's Guide
Figure 207 Removing a Back-Loadable Module from the 8164A/B
If you pull the module out at an angle or vertically, you may damage the
instrument and the module. You should pull the module out along the
direction shown in
How to Fit a Back-Loadable Module
Disconnect all electrical and optical connectors before you fit this
module into the instrument, as this can cause damage to the connectors.
Make sure that the instrument is in stand-by mode, before you remove a
module.
Installation and Maintenance
on page -331
Figure 207
11
331