10
Applications
264
Figure 162
Selecting/Deselecting Power Meters
1
Move to the Module Selection box. As a default, all Power Meters are
selected, this means that all Power Meters will log power
measurements. Press [Edit].
2
To deselect a Power Meter channel, move to the Power Meter as
denoted by slot and channel numbers, see
on page 39, press [Unset].
3
To select a Power Meter channel, press [Edit], move to the Power
Meter as denoted by slot and channel numbers, see
Numbers
4
Perform steps until you have selected the required Power Meters for
your application and press Enter.
If no Power Meter channel is selected, you cannot 'exit' by pressing
NOTE
Enter.
The Keysight 8163B Logging Modules Setup Screen
on page 39, press [Set].
Slot and Channel Numbers
Slot and Channel
8163A/B, 8164A/B, 8166A/B User's Guide