8163B Lightwave Multimeter
Power
Sensor
8163A/B, 8164A/B, 8166A/B User's Guide
7
Press [Close] to exit from the menu.
Measuring the Power Transmitted through the Measurement Patchcord
Next, measure the power transmitted through the measurement patch
cord.
1
Making sure all the connectors are clean, set up the instrument as
shown in
measurement patchcord
Figure 116
or
Figure 117
Figure 117
2
.Move to the Power Sensor channel:
•
Press [Menu].
•
If necessary, move to <Pwr unit>, move to <dB> and press Enter.
•
The Power Sensor channel displays a power value in dB that is equal
to the front panel delta of the measurement system.
Figure 116
on page -195 if you are using an External Source,
8161x
Power Transmitted through the Measurement Patchcord - External Source
on page -195 if you are using an internal source.
Power
8163B Lightwave Multimeter
8161x
Sensor
measurement patchcord
Power Transmitted through the Measurement Patchcord - Internal Source
Return Loss Measurement
Laser
8163B Lightwave Multimeter
Source
7
195