Keysight Technologies 8163A User Manual page 258

8163A/B, 8164A/B, 8166A/B User's Guide
How to Lock Markers to the Curve
You can lock markers A and B to curves by performing the following
instructions:
1 Press the [Menu] softkey and move to <Lock to Curve>. A menu
displaying the options displayed in
page 257 appears.
Figure 156
2 Press the [A] softkey to lock marker A to a curve. The number opposite
Marker A on curve: is highlighted.
3 Use the cursor key to move to the legend number of the curve to which
you want to lock marker A.
4 Press Enter. Marker B will be locked to the same curve as marker A, if it
was assigned to curve 0 immediately before, that is, it was unassigned
immediately before.
5 If you want to assign marker B to another curve, press the [B] softkey,
use the cursor key to move to the legend number of the curve to which
you want to lock marker B, and press Enter.
The Lock to Curve Menu
Applications
The Lock to Curve Menu
10
on
257