Table of Contents
Advertisement
8163A/B, 8164A/B, 8166A/B User's Guide
Figure 167
Setting Analysis Parameters
3
To edit the power units used for the analysis, move to [W], press Enter,
move to <dBm>, <W>, or <dB>, and press Enter. See
Power Units ?
4
To edit the reference mode used for the analysis, move to <Ref Mode>,
press Enter, move to one of the following referencing modes:
•
<Value>, you set a reference value using <Ref>, see
•
<First Sample>, the first sample of the logging function is selected
as the reference value,
•
<Channel 1>, the value that Channel 1 measures is updated as the
reference value for each set of power measurements (thus, each
data value for channel 1 will be 0 dB), and
•
press Enter.
These settings have an effect when you choose <dB> as the <Pwr unit>.
NOTE
See step 2 or step 3.
The Keysight 8163B Logging Analysis Screen - First Screen
on page 101 for an explanation of power units.
Applications
10
What are the
step 5
,
271
Hide quick links:
Advertisement
Table of Contents
