Table of Contents
Advertisement
8163A/B, 8164A/B, 8166A/B User's Guide
To remove electrical offsets:
1
Make sure the optical input is not receiving any light. If the instrument
has just been switched on, wait until SETTLING is not displayed for the
module channel.
Figure 59
Module Channels that are Setting
2
Move to the Power Meter channel and press the [Menu] softkey.
3
Move to the <Zero> option to zero the current power measurement
channel or the <Zero All> option to zero all power measurement
channels. You will see the screen shown in
appears for around 30 seconds while zeroing is performed.
Power Measurement
Figure 60
on page -108, this
3
107
Hide quick links:
Advertisement
Table of Contents
