Keysight Technologies 8163A User Manual page 121

3 Power Measurement
120
How to Trigger Power Measurements
You can configure 8163A/B Series Power Meter modules to perform
certain tasks when you apply a trigger to the Input Trigger Connector.
You must prearm a measurement function before an action can be
triggered:
1 See How to Set the Trigger Configuration
configure the trigger connectors.
2 Move to the Power Meter channel and press the [Menu] softkey.
3 Move to <Input Trigger Mode>, by using the cursor key, and press
Enter. You will see the screen in
Figure 70
4 Move to one of the following, by using the cursor key:
• <Single meas>, an input trigger will trigger one sample of a
measurement function to be performed and to store the result in a
data array.
• <Compl. meas>, an input trigger will trigger a complete
measurement function to be performed.
• <Ignore>, input triggers are ignored.
5 Press Enter.
Input Trigger Mode
on page 68 for how to
Figure 70 on page -120.
8163A/B, 8164A/B, 8166A/B User's Guide