8163A/B, 8164A/B, 8166A/B User's Guide
Figure 171
Selecting/Deselecting Power Meters
2
Move to the Module Selection box. As a default, all Power Meters are
selected, this means that all Power Meters will log power
measurements. Press [Edit].
3
To deselect a Power Meter channel, move to the Power Meter as
denoted by slot and channel numbers, see
on page 39, press [Unset].
4
To select a Power Meter channel, press [Edit], move to the Power
Meter as denoted by slot and channel numbers, see
Numbers
5
Perform steps until you have selected the required Power Meters for
your application and press Enter.
If no Power Meter channel is selected, you cannot exit by pressing Enter.
NOTE
The Keysight 8163B Stability Module Setup Screen
on page 39, press [Set].
Applications
Slot and Channel Numbers
Slot and Channel
10
277