Electrical Connection Of The Motor Unit - Festo HSP AE Series Manual

3. Installation
3.2

Electrical connection of the motor unit

1
Serial interface
2
Without function
(do not connect)
3
I/O control
4
Power supply
(POWER)
Fig. 3/2: Connections of the motor unit
Festo P.BE−HSP−AE−IO−EN en 0510NH
Caution
Incorrectly prepared cables may damage the electronic
components and trigger off unexpected movements of the
motor.
Use only the cables listed as accessories for connecting
·
the electric components of the system (see Tab. 3/2).
Only in this way can you be sure that the system will
function correctly.
Please note
Lay all moving cables free of bends and free of mechan
·
ical stress, if necessary use a drag chain.
Observe the maximum specified cable lengths.
·
1
2
3
4
3−5