Main Menu - Operation And Display - Group - Danfoss VLT AQUA Programming Manual

2. Parameter Description

2.2. Main Menu - Operation and Display - Group 0

2.2.1. 0-0* Operation / Display
2
Parameters related to the fundamental functions of the frequency converter, function of the LCP
buttons and configuration of the LCP display.
2.2.2. 0-0* Basic Settings
Parameter group for basic frequency converter settings.
0-01 Language
Option:
[0]
0-02 Motor Speed Unit
Option:
[0]
[1]
0-03 Regional Settings
Option:
[0]
26
* English
*
RPM
Hz
* International
MG.20.O2.02 - VLT
Function:
Defines the language to be used in the display.
Function:
This parameter cannot be adjusted while the motor is running.
The display showing depends on settings in parameter 0-02 and
0-03. The default setting of parameters 0-02 and 0-03 depends
on which region of the world the frequency converter is supplied
to, but can be re-programmed as required.
NB!
Motor Speed Unit
Changing the
parameters to their initial value. It is recommen-
ded to select the motor speed unit first, before
modifying other parameters.
Selects display of motor speed variables and parameters (i.e.
references, feedbacks and limits) in terms of motor speed
(RPM).
Selects display of motor speed variables and parameters (i.e.
references, feedbacks and limits) in terms of output frequency
to the motor (Hz).
Function:
This parameter cannot be adjusted while the motor is running.
The display showing depends on settings in parameter 0-02 and
0-03. The default setting of parameters 0-02 and 0-03 depends
on which region of the world the frequency converter is supplied
to but can be re-programmed as required.
Sets par. 1-20 Motor Power
Motor Frequency
of par. 1-23
®
is a registered Danfoss trademark
®
VLT AQUA Drive Programming Guide
will reset certain
units to [kW] and the default value
[50 Hz].